GSDK77 High-Speed Wire-Moving Cutting
GSDK77
Product category: GSDK77
Product model: GSDK77
Brand: Wenjie CNC
Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd.
The new manufactured by the Company changes the traditional structure and adopts the computer integrated control, which has the following characteristics:
★Efficiency: Cutting efficiency is 15,000 m3 per hour
★Low consumption: 600,000-800,000 m3/one litre of cutting fluid
★Environmental protection:
(1) It is equipped with automatic demist device, which eliminates the free oil, water and gas in the air and greatly improves the operating environment;
(2) cutting fluid adopts the exclusive formula, which requires no replacement for lifetime. When the concentration is low, it is necessary to add cutting fluid only, rather than dumping, which is free from contamination.
★adopts the integrated computer control, which integrates computer, high-frequency power supply, driving power and electric equipment for machine tools, so that it is attractive, environmentally-friendly, easy to operate and reduces the floor area.
|
Type |
unit |
GSDK7720 |
GSDK7725 |
GSDK7732 |
GSDK7732B |
GSDK7740 |
GSDK7740B |
|
Worktable Size (W*L) |
mm |
250×420 |
330×520 |
360×600 |
410×670 |
460×680 |
520×745 |
|
X,Y-axis trip（Y×X） |
mm |
200×250 |
250×320 |
320×400 |
350×450 |
400×500 |
450×550 |
|
U,V-axis trip（U×V） |
mm |
70×70 |
|||||
|
Max load weightof attractive linear cutting machine tool |
kg |
200 |
250 |
350 |
400 |
450 |
600 |
|
Max linear cutting thickness |
mm |
250 |
400mm（330） |
500mm（430） |
500mm（430） |
500mm（430） |
500mm（430） |
|
Machined taper/work piece thickness |
12°/80mm |
||||||
|
Z-axis elevation mode |
Manual/electric elevation |
||||||
|
Type of guide track |
Slide guide |
||||||
|
Electrode wire diameter range |
mm |
Ф0.15~0.20mm |
|||||
|
Wire speed |
m/sec |
1~11.4m/sec 7 frequency conversion adjustable |
|||||
|
Machining accuracy |
mm |
≤0.015 |
|||||
|
Max cutting efficiency |
mm²/min |
≥250 |
|||||
|
Optimum surface roughness |
um |
Ra≤2.5 |
|||||
|
Control mode |
X, Y, U, V stepper motor |
||||||
|
Number of control axis |
Four-axis linkage |
||||||
|
Min instruction unit |
mm |
||||||
|
Power supplyof environmentally-friendly linear cutting machine tool |
Three-phase four-wire 380VAC/50HZ |
||||||
|
Max operating current |
A |
12 |
|||||
|
Machine tool power consumption |
kw |
＜2 |
|||||
|
Working fluid |
Special for Wenjie (self-made), equipped with a concentration meter |
||||||
|
Working fluid tank volume |
L |
55 |
|||||
|
Work liquid filtrate way |
Strainer, magnetic plate |
||||||
|
Host weight |
kg |
800 |
900 |
1000 |
1100 |
1300 |
1400 |
|
Host outline size |
mm |
1060×800×1100 |
1400×900×1350 |
1500×1200×1400 |
1600×1300×1400 |
1700×1400×1400 |
1750×1500×1400 |
More information please view .
在线联系供应商
Other supplier products
 |
CNC Machine Tool—Single-Chip Microcomputer Control System | Product category: Product model: Single-chip microcomputer control system Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd... |
 |
high-speed linear cutting machine tool | GSDK77 Product category: GSDK77 Product model: GSDK77 Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd. The new manufactured... |
 |
cone machining CNC Machine Tool | Description Type Unit DK77120 DK77120B DK77120F DK77160 Worktable Size (W*L) mm 1900×1310 2100×1310 2300&tim... |
|
|
GSDK77 High-Speed Wire-Moving Cutting | GSDK77 Product category: GSDK77 Product model: GSDK77 Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd. The new manufac... |
 |
CNC Spark Wire Cutting Machine Tool | Product category: Product model: DK77series wire cutting machine tool Brand: Wenjie CNC Manufacturer: Taizhou Wenjie CNC Equipment Co., Ltd. Desc... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
