EQMS-200 VOCs Online Monitoring System
Overview
EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough uv energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas.
Composition Of EQMS-200 VOCs Online Monitoring System
The system consists of a sampling unit, condensing unit, zeroing unit, calibration unit, display unit, pressure alarm unit and analysis instrument. The sample gas enters into the PIO under the action of filtration and condensation of the suction pump. The detector transmits the processed concentration signal to the display unit, the end user, and the EPA platform. The user can set the auto-zeroing and calibration period according to the actual situation. While the pressure alarm unit outputs a pressure alarm signal when the injection port of the analysis instrument is blocked, prompting the end user to clean the filter in time.
Specifications Of EQMS-200 VOCs Online Monitoring System
|
MeasurementPrinciple |
PID (Photoionization Detector) |
|
Measurement gas |
Benzene, xylene, naphthalene, octane, ethylene, cyclohexane, acetone,propylaldehyde, ether, etc. |
|
Measurement Range |
0-50pp m (Customizable) |
|
Detection limit |
10ppb |
|
Drift/ Repeatability |
±1%~±5% |
|
Measurement error |
<±5%FS |
|
Sampling flow |
2L / min |
|
Response time |
<15s |
|
Historical data storage |
10 years |
|
installation method |
Wall mounting typeor cabinet type |
|
Enclosure rating |
IP65 |
|
Ambient temperature |
-25°C~55°C |
|
Display |
|
|
Power supply |
AC 220V, 50-60Hz |
|
Power Consumption |
50W |
|
Weight |
50kg |
|
Carrier gas and sample gasflow control |
Electronic monitoring |
|
Communication interface |
RS232/485 |
|
Communication protocol |
HJ/T212, modbus |
Contact us to know more about voc computer monitor price!
在线联系供应商
Other supplier products
 |
FT-2000P Portable FTIR Gas Analyzer | Overview Based on FTIR technology, FT-2000P portable FTIR gas analyzercan continuously monitor various kinds of components in the emission, such as... |
 |
Continuous Emission Monitoring & Process Control | The instruments and analyzers produced by Zetian now are widely used at home and abroad. They are: UV DOAS gas analyzer, laser TDLAS gas analyzer, ... |
 |
Humidity Analyzer | Hygronom is also called moisture meter or dew-point meter, a kind of humidity test meter, which is used to meter humidityof flue gas emitted by pol... |
 |
FT-3000 FTIR Gas Analyzer | HANGZHOU CHUNLAI (ZETIAN) TECHNOLOGY was established in 2008, and has national wide impact in China now as a fast-growing company specialized in en... |
 |
Zetian technology is the only high and new technology company with a full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultravio | Overview Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing en... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | 卖方: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
