BM6 High Pressure Motor
Brief Introduction:
BM6 high pressure hydraulic motoris a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate and preloading spring. This hydraulic motor features low speed and high torque. The motor has a six-toothed cycloidal rotor, which is installed in the middle of the stator and meshes with the stators of the seven arc teeth to form seven sealed spaces; 12 holes on the distribution plate, 6 of which are combined with the oil. The mouth is connected, and the other six are connected to the back (in) port. The seven holes auxiliary distribution plates on the valve disc form a seven volume chamber with the cycloidal rotor.
Product Description
BM6 is a large volume, disc valve, high pressure motor, with ball-bearings design, and can bear big load, and has higher torque than BM5.Advanced design in disc distribution flow, which can provide improved performance at low speed. The valve can automatically compensate for the wear, so the volumetric efficiency is high. Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications
|
Quick Details |
||||
|
Type |
Hydraulic Motor |
Series |
BM6 hydraulic motor |
|
|
Place of Origin |
China (Mainland) |
Brand Name |
Gulex |
|
|
Displacement(ml/r) |
195-985 |
Material |
Ductile Iron |
|
|
max torque(N*m) |
575~1875N*m |
Surface treatment |
Spray Painting |
|
|
pressure(MPa) |
12~20.5 MPa |
Max cont Flow |
150L/min |
|
|
Speed(RPM) |
153~775r/min |
Oil temperature |
-35℃~80℃ |
Are you looking for custom forged parts? JC forging is a professional manufacturer of precision forging parts. Just contact us!
在线联系供应商
Other supplier products
 |
Forged Trunnion | Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grad... |
 |
Forged Hydraulic Cylinder Head | Founded in 2000, JC forging is a professional manufacturer of precision forging parts. The company's main product is die mold forging parts, includ... |
 |
Forged Hydraulic Cylinder Head | As a reliable custom metal forged components manufacturer, JC Forging provides custom forged parts of various shapes, such as forged hydraulic cyli... |
 |
Forged Trunnion | Founded in 2000, JC forging is a forged components manufacturerof forged metal products. The company's main product is die mold forging parts, incl... |
 |
Hydraulic Cylinder | Hydraulic cylinder is an actuator that converts hydraulic energy into mechanical energy and performs linear reciprocating motion (or oscillating mo... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
