8-5/8'' Casing Pipe
Oil casing is the lifeline for maintaining oil well operations. Due to different geological conditions, the state of the downhole is complicated, and the combined action of tension, compression, bending and torsion stress acts on the pipe body, which puts high requirements on the quality of the casing itself. Once the casing itself is damaged for some reason, it may result in a reduction in production and even scrapping of the entire well.
According to the strength of the steel itself, the casing can be divided into different steel grades, namely J55, K55, N80, L80, C90, T95, P110, Q125, V150 and so on. The well conditions and well depth are different, and the steel grades used are also different. The casing itself is also required to have corrosion resistance in a corrosive environment. In the complex geological conditions, the casing is also required to have anti-crushing performance.
Features of 8-5/8'' Casing Pipe:
8 5/8" (219.08mm) API 5CT Seamless Casing Pipe
API-5CT Casing Pipe Steel grade: J55/K55/N80/L80/P110/C95/13Cr/28Cr
Threads: BTC, LTC, STC，PRMIUM CONNECTION
Length range: R1, R2, R3
Technical Specifications of 8-5/8'' Casing Pipe:
|
OD mm |
Ib/ft |
Grade |
short |
long |
buttress |
|
|
J, K |
YES |
|||||
|
H |
YES |
|||||
|
H, J, K |
YES |
YES |
YES |
|||
|
J, K, C, L, N |
YES |
YES |
YES |
|||
|
C, L, N, P |
YES |
YES |
||||
|
C, L, N, P |
YES |
YES |
||||
|
C, L, N, P, Q |
YES |
YES |
||||
|
J, K, M |
YES |
YES |
||||
|
J, K, M |
YES |
YES |
||||
|
J, K |
YES |
YES |
YES |
SAIGAO GROUPis one of the best oil equipment suppliers,we have 8 inch casing pipe,RFQ today.
在线联系供应商
Other supplier products
 |
Choke Manifold | Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of we... |
|
|
8-5/8'' Casing Pipe | Oil casing is the lifeline for maintaining oil well operations. Due to different geological conditions, the state of the downhole is complicated, a... |
 |
Marine Standpipe Manifold | Purpose of marine standpipe manifoldin the process of blowout control and implementation of oil and gas pressure control technology, it can be used... |
 |
Guide Shoes | SAIGAO GROUPGuide Shoes are attached to the lowermost end of the casing string to provide a low-cost method of enabling the casing to pass ledges o... |
 |
Non-welded Hinged Semi-rigid Bow Spring Centralizer | Saigao's non-welded hinged semi-rigid bow spring centralizers ensure high efficiency in casing jobs on deviated and horizontal wells. Combining the... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
