Wire Drawing Machine LZZ-4-560
TechnicalDataof steel wire drawing machineLZZ-4-560TECHNICAL CHARACTERISTICSPower supply voltage380 [V] – 60 [Hz]Installed power200 [KW]AirConsumption (filtered, dried, no water, no oil)0.5 [m3/min]Oper...
|
TECHNICAL CHARACTERISTICS |
||
|
Power supply voltage |
380 [V] – 60 [Hz] |
|
|
Installed power |
200[KW] |
|
|
Air |
Consumption (filtered, dried, no water, no oil) |
|
|
Operational pressure (constant) |
||
|
Water |
Consumption (clean, filtered, no residues, no calcium, no deposits) |
30[m3/hr] |
|
30 [°C] |
||
|
Ambient conditions |
Temperature |
0 – 40 [°C] |
|
Altitude |
< 1000 [m.a.s.l.] |
|
|
MATERIAL CHARACTERISTICS |
||
|
Raw material type |
Hot rolled low carbon wire rod |
|
|
Coil dimension |
Inner diameter |
Min850[mm] |
|
Outer diameter |
Max1250[mm] |
|
|
Height |
2500[mm] |
|
|
Coil weight |
Max2,500[Kg] |
|
|
Wire rod inlet tensile stress |
Min440 [N/mm2] |
|
|
Wire rod inletdiameter |
|
|
|
FINISHED PRODUCTS CHARACTERISTICS |
||
|
Production rate |
Max6[m/sec] |
|
|
Finished products type |
Cold drawing wire coil |
|
|
Coil dimension |
Inner diameter |
Min500[mm] |
|
Outer diameter |
Max1100[mm] |
|
|
Height |
490[mm] |
|
|
Coil weight |
Max1,500[Kg] |
|
|
Wire rod outlet tensile stress |
Min550 [N/mm2] |
|
|
Wire rod outletdiameter |
|
|
TJK is one of professional wire mesh welding machine manufacturers. We provide bending welded wire mesh, welded wire mesh bender, wire drawing machine video, mesh bender, wire mesh bender for sale, reo bending machinesand so on. Want to know about automatic stirrup bending machine priceand stirrup bending machine price? Please contact us.
在线联系供应商
Other supplier products
 |
Wire Cage Welding Machine | Reinforcement cage is used more and more in the construction projects, the traditional manual made steel cage is a waste of time and labor, low eff... |
 |
Wire Bending Machine | Automatic Wire Bending Machine Stirrup Bender WG12D-4 Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, const... |
 |
Wire Straightening and Cutting Machine GT3-7 | Wire Straightening and Cutting Machine GT3-7 Wire Straightening and Cutting Machine GT3-7(automatic wire cutter machine) fast in straightening and ... |
 |
Stirrup Bender WG12D-4 | TJK is a leading manufacturer for steel reinforcement bending machines: Sitrrup bending, Cut & Bend, Mesh Welding, Cage Welding, Lattice Girder... |
 |
Stirrup Bending Machine | TJK is a leading manufacturer for steel reinforcement bending machines: Sitrrup bending, Cut & Bend, Mesh Welding, Cage Welding, Lattice Girder... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
