Fufu Machine

Features of Fufu ProcessingMachine

Fufu makingmachine for sale- Make Fufu(foofoo) from Fresh Cassava

Fufu Process Description and Flowchart:

How to make fufu with cassava flour

Fufu (variants of the name include foofoo, fufuo, foufou) is a staple food with deep roots in Ghana's history and common in many countries of West Africa and the Caribbean. It is often made with cassava flour. Other flours, such as semolina, maize flour or mashed plantains may take the place of cassava flour. Fufu served alongside soup, usually, groundnut soup is a national dish of Ghana.

Goodway focuses on providing solutions of fufu maker machineand cassava fufu processingproduction line since 1991.

Multiple distinct operations are required in fufu processing: washing, peeling, chipping, fermenting, grating, pressing, breaking & sifting, fufu drying, milling, and packaging.

We provide below a brief description of the main steps of the fufu production process.

Cleaning and Washing Cassava Roots

Wash the fresh cassava roots in clean water to remove the surface mud and sand. It's the first step of the fufu process and very important for the quality of final fufu(foofoo).

Peeling Cassava Roots

Peel the washed cassava roots to remove the outer brown skin and inner thick cream layer. The water source should be checked regularly to ensure it is not dirty or contaminated.

Cutting Cassava Roots into Cassava Chips

Cut the peeled cassava roots into chips by the high speed rotating circular cutter blade, then cut the chips into strips by the cross cutter blade.

Fermenting Cassava Chips or Strips on the Fermentation Rack:

Collect the cassava chips or strips into a clean polythene sack and tie, then bagged cassava chips or strips can be left in the fermentation rack for one or more days before grating, allow the milky water to drain freely from the bags.

Grating Fermented Cassava Chips into Mash

Load the grater with fermented cassava chips while the engine is running to grate peeled cassava chips into the mash. The grating drum and all food contact areas should be made from stainless steel.

De-watering Mash into Wet Cake

Load the bags directly on to a hydraulic press. Lift and press the jack handle up and down until it becomes hard to move. Repeat the process several times each day until no more water comes out of the bag to produce a firm wet cake.

Breaking Wet Cake and Sifting Wet Cake into Grits

Breaking the wet cake into small pieces (grits) and remove the lumps to obtain uniform size grits(wet coarse fufu). All food contact areas should be made from stainless steel

Drying Grits into Dried Coarse Fufu

Dry the grits(wet coarse fufu) into dried coarse fufu with low moisture content by the principle of heat transfer exchange.

Milling Coarse fufu into Fine fufu

Milling the dried coarse fufu into fine fufu with the uniform size, then pour the fufu into a plastic lining inside a woven polythene sack.

If you want to know fufu machine price, please contact us.

Other supplier products

	Cassava Garri Fryer	Features of Cassava Garri Fryer Machine Processing Capacity: 100-300kgs/hour Application Scope: Garri frying or roasting Product Introduction: G...
	Rotary Vacuum Filter	Features of Rotary Vacuum Filter Processing Capacity: 0.2-0.3Tons/h/m2Application Scope: Cassava or potato starch dewateringProduct Introduction: ...
	Cassava Presser	Cassava Presser ZTZY screw progressive extrusion separator is a continuous operation press separator for organic material extrusion liquid and ino...
	Dewatering and Drying System	The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible a...
	China Potato Peeling Machine	With the development of food industry, food deep processing has been paid more and more attention by the world, especially in the birth of instant ...

供应产品

Same products

	GT-DG250 轧辊机	卖方: 肇庆古雷特科技有限公司	• 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu...
	Double Spindle Lathe NL251D	卖方: Lecn Anhui Co., Ltd	A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ...
	Automobile Torsion Beam Milling Machine X8220125	卖方: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len...
	Joint Cross Machine CZ821030/TZ820510	卖方: Lecn Anhui Co., Ltd	Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt...
	Break Cam Milling Machine CM0525	卖方: Lecn Anhui Co., Ltd	can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams...