Hexagonal Shaft
Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench and temper after treatment.
Technical Details of
Brand：LESUN
Material：40CrNimo
Max Lentgh：6 meters
Application: Extruder
Hexagon ShaftClassify
Processing Characteristics of Hexagonal Shaft
As a specializedextruder screw manufacturer, we provide hexagonal element, parts of screw, extruder feed screw, etc. Contact us to know involute spline shaft designor extruder screw types.
在线联系供应商
Other supplier products
 |
Extruder Open Screw Barrel | The extruder open screw barrelare used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the... |
 |
Kneading Screw Elements | Diameterof Kneading Element: φ20 mm ~φ300 mm Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sw... |
 |
Screw Shaft | Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wear-resisting, Corrode-resisting, Durable Shaft screwis key to pow trans... |
 |
Involute Spline Shaft | The involute shaftis the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB st... |
 |
Side Feeder Elements | This side feeder element is to help the bulk materials that are fed into the extrude. Technical Details of Side Feeder Elements Brand：LESUN Model... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
