CEILING ROLL FORMING MACHINE
CEILING ROLL FORMING MACHINE
Ceiling channel roll forming machine is a special machine designed for the ceiling industry. It has high speed and high efficiency, stable performance, low energy consumption, low noise, etc., beautiful appearance, compact structure and responsive.
The three-dimensional board produced by the metal 3D gusset machine can be used not only for the door decoration of the storefront, but also for indoor and outdoor wall decoration and ceiling decoration. The 3D board is different from our common stereo soft pack material. The three-dimensional board adopts galvanized sheet as raw material, relying on the original mature technology, the color steel three-dimensional board is lower in price than the similar plastic three-dimensional gusset plate, the material is light, the quality is good, the paint is not easy to fall off, it is not easy to be deformed, anti-aging, anti-corrosion Strong, durable and long life. Rich in color, flexible combination, fancy variety, novel and easy to install.
Hydraulic Press
Three beam four column hydraulic press, computer optimized structural design, three-beam four-column structure, simple, economical and practical, hydraulic control adopts plug-in valve integrated system, reduce leakage point, reliable action, long service life, can realize two forming processes of constant pressure and fixed stroke, and has rolling prevention The time function, the working pressure stroke can be adjusted within the specified range, and the button centralized control can realize three operation modes: manual, semi-automatic and automatic.
Ceiling Roll Forming MachineAdvantages:
Save energy, use high pressure and large flow constant power, low noise oil pump oil supply;
The master cylinder is idle and fast, and the return journey is fast;
The lower cylinder has a fast return stroke, and the downward pressure of the lower cylinder is not affected by the pressure used;
High safety factor, equipped with photoelectric protection, overload protection device;
The working performance is good, and the supporting electrical appliances and hydraulic main parts are all imported parts;
Easy to operate, fast, with jog, fully automatic; equipment with infrared photoelectric reflection induction to reliably protect the operator's safety.
The main circuit uses loss of pressure, overload, phase failure protection, safety, voltage stability, isolation 380V control power, Safe, stable voltage, isolated 380V control power supply, using a single cylinder, to make the product more perfect, and improve production efficiency.
If you want to know more about ceiling channel roll forming machine price, please contact us.
As one of roll forming machine manufacturers in china, we have types of different machines for sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
C & U CHANNEL ROLL FORMING MACHINE | Overview of C & U Channel Roll Forming Machine Like other hollow sections, steel channel is rolled from steel sheet into C or U shapes. It con... |
 |
Standing Tube Cutting Machine | Main Function It is mainly used in tube cutting. Basic Parameter Length:0.6~3m Tube diameter:￠33m、￠48mm and ￠60mm Length tolerance：≤0.5mm BOSJ e... |
 |
C & U CHANNEL UNISTRUCT METAL ROLL FORMING MACHINEE | Slip Roll Former Width of material sheet:≤200 mm Thickness of material sheet: 2.0~2.5 mm Power: 380V, 50Hz, 3 phase Forming Speed with punchi... |
 |
PROFILE ROLL FORMING MACHINE | The steel profile roll forming machine mainly consists of four parts: The first is the input section - in this section, the material is loaded at ... |
 |
LIGHT GAUGE STEEL FRAMING C PURLIN ROLL FORMING MACHINEE | OSJ Light Gauge steel framing roll formeris suited to construct walls, floors and roofs for 1 – 3 level residential, modular and transportabl... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
