Wind Turbine Blade Transport Trailer
Windmill mainly includes wind blades, turbine, wheel hub, and wind tower. Each component belongs to oversize cargo which needs to be transported by ordinary highway and also needs to be transported by specialized vehicles. For the wind blade, its length is very long, which has become the main feature different from other equipment of the windmill. However, the longer the blade, the more difficult wind turbine heavy haul transport carriersand the higher the transportation cost. With the development of low wind speed and the large capacity of the unit, the transportation of wind blades is a big problem.
The proportion of windmill blade transport cost to the total has gradually increased, and the longer the blade, the higher the requirements on the windmill blade transportroad. Therefore, how to transport blades safely and economically is a technical problem that needs calculation and planning, in which wind turbine blade transport trailerwill be a helper on this.
TYPES OF WIND TURBINE BLADE TRANSPORT TRAILER
Blade Lifter
Wind Turbine Blade Trailer
Wind Tower Trailer
RUI TRAILER'S EXAMPLE OF WIND POWER TRANSPORTATION
Walks with the new challenge -- the full record of 81m wind blade transportation.
81- meter wind blades are on the way. This length not only brought many difficulties to transportation but also new opportunities and challenges. In view of these difficulties. The Blade lifter has a stronger loading capacity, which can better adapt to the project road conditions, and reduce the pressure caused by the wind blade transportation.
The road is narrow, and there are many vehicles around, plus the wires are close to the buildings, so the blade lifter can only walk backward. It is extremely testing of wind turbine heavy haul transport carriers.
In the cave on the village road under the expressway, due to load with the wind blades, the blade lifter needs against the cave wall and hang the blades. especially at the entrance, it did not operate properly, the blades would be damaged. Therefore, the huge wind blades need to keep adjusting the height of the blades and accurately estimate the height. After that, people will successfully pass through the entrance and reach the designated position.
The Advantages Of Wind Turbine Blade Transport Trailer
THE ADVANTAGES OF WIND TURBINE BLADE TRANSPORT TRAILER
The blade trailer ordinary has a telescopic boom flatbed trailer, semi-low bed and hydraulic suspension. Let's introduce to you:
The ordinary telescopic flatbed trailer is somewhat similar to extendable flatbed trailer, but its chassis adopts the telescopic boom design. The boom adjusts the trailer length to extend to the wind blade transport of different lengths. It is understood that the maximum length of such a wind blade trailer can reach 70m.
The biggest difference between the semi-low bed and the flatbed is that the platform height adopts the low bed semi trailerdesign, which makes the wind blade lower. There is also have a suspension that adopts the hydraulic axle design, which keeps the wind blade more stable and the steering more flexible.
Wind blade trailers, full extend length can reach to 35m, 42m, 45m, 56m,62m,70m which with hydraulic steering. The biggest feature of the wind blade trailer is that it is super long and has a longitudinal telescopic function. Due to the super long model, it is very difficult to turn. In order to overcome the difficulties of driving in mountain areas, wind blade trailers are generally equipped with a hydraulic steering system.
Such trailers are specially designed for the transportation of wind turbine being transportedblades, with a maximum telescopic length of 70 m. Due to the length of the cargo itself, the turning difficulty is greatly increased. In order to overcome the difficulty of driving in curves, all axles are steerable and matched with the power pack for the hydraulic power supply. equipped with wireless remote control to realize steering, and the maximum angle is 55 degrees.
If you want to know the price of heavy trailers for sale, please leave us a message.
在线联系供应商
Other supplier products
 |
WIND TOWER TRAILER | Wind Tower Trailers for Sale The wind tower trailer is a telescopic boom low bed trailer specially used to transport wind towers. The wind tower c... |
 |
Self Propelled Modular Transporter | What is a spmt trailer SPMT: self propelled modular transporter for salealso known as a self-propelled modular trailer, which is mainly used for t... |
 |
MODULAR TRAILER | Modular trailers for heavy equipmentare normally used for transporting heavy loads over 80t. The transporting heavy loads are generally applicable ... |
 |
DETACHABLE GOOSENECK TRAILER | Detached gooseneck traileralso called removable gooseneck trailer refers to a heavy-duty low bed semi-trailer with mechanical or automatic disassem... |
 |
MODULAR TRAILER | A modular traileris normally used for transporting heavy loads over 80t. It is generally applicable to the medium and long-distance highway transpo... |
Same products
 |
GT-JYH12 热流道CNC数控缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JYH12 热流道CNC数控缩管机，主要用于热流道加热器、小型加热器的缩管加工。 主要参数 缩后直径：1.2–6mm 缩前最大直径：9mm ... |
 |
GT-JY18 18 段缩管机 | 卖方: 肇庆古雷特科技有限公司 | 产品说明 GT-JY18 型 18段缩管机是一款常用的管状加热器缩管设备，采用整体式铸铁床身。由于铸铁整体床身刚性好、强度高，不易变形，可保障设备长期稳定运行。 主要参数 ... |
 |
Multiple Blades Digital Label Cutter VR350 | 卖方: WILLIAM CNC TECHNOLOGY | Multiple Blades Digital Label Cutter VR350 The VICUT multiple blades digital die cutterVR350, eq... |
 |
Digital Label Die Cutting Machine VR240X | 卖方: WILLIAM CNC TECHNOLOGY | Digital Label Die Cutting Machine VR240X VR240X digital label finisheris redeveloped based on th... |
 |
Rotary die cutting machine VR320 | 卖方: WILLIAM CNC TECHNOLOGY | Rotary die cutting machine VR320 The VICUT VR320 roll to roll labels cutting machineis the most ... |
