Direct Square Tube Mill Line

Direct Square Tube MillLine is mainly used to produce the square and rectangular tubes directly, from square to square or rectangular to rectangular directly. As a professional square tube machinemanufacturer, Hangzhou Roll Forming offers high-end square tube mill production line with consistently high quality.

Characteristics and Advantages of Direct Square Tube Mill Line

Compare with a round to square or rectangular roll forming method, directly roll forming to the square or rectangular method is better for the shape at the edge of cross-section, comparatively, semi-diameter of the inner arc is small, and the brim is flat, the outlook is regular.

The tube mill line load is low, especially the sizing machine.

The width of the steel strip is reduced by about 3% compared with around to square or rectangle, so this direct square tube mill line will save the consumption of raw material.

Directly roll forming method adapts the multi-point bending way, which greatly avoids the axial force and side abrasion and reduces roll forming steps while ensuring the quality; meanwhile, this method of our direct square tube mill line also effectively reduces the power wastage and roller abrasion.

Directly roll forming method adapts the combined type roller on most of the stands, this realizes that one set of rollers can produce dozens of square or rectangle tubes with different specifications. This decreases the store of rollers, lowers the cost of about 80% on rollers.

Which is Stronger Round or Square Tubing?

To answer this question, we have to take various factors into consideration. With all the things being equal, the square tube mill tends to have more steel material per diameter. As a result, it will be more resistant to the torsion force and it will be more suitable for the fabrication and application of reinforcing gussets. However, when it comes to the situation, where the internal pressure or force exists, the rounded pipe will, on the contrary, be "stronger" than the squared ones due to its circular structure.

As a professional tube mill machine manufacturer, we provide steel coil upender, coil upender, square pipe forming machine, square tube roll forming machine, steel square pipe roll forming machine, square tube manufacturing machine, china square pipe making machine, tube roll forming machineand etc. Contact us to know more.

Other supplier products

	Ridge Cap Roll Forming Machine	The series of metal roof ridge cap machine are mainly used to make ridge capping. Ridge capping is a critical part of the structure of a roof. Ridg...
	Stainless Steel Tube Mill Line	STAINLESS STEEL TUBE MILL LINE Stainless still tube millLine is specially used for producing stainless steel straight seam welded pipe. It is ma...
	Solar Photovoltaic Support Rolling Machine	SOLAR PHOTOVOLTAIC SUPPORT ROLLING MACHINE Double-in-roll c-shaped steel photovoltaic bracket is mainly applicable to the ground photovoltaic po...
	Decoilers	This sheet metal decoiler for sale is the special equipment for leveling metal plates. It is used for leveling steel plates and uneven plates. Acco...
	Roof Panel Roll Forming Machine	This metal cladding roll forming machineis used to roll-form metal roof panels and metal wall panels. The roll forming lineusually includes metal d...

供应产品

Same products

	NCM-4.8型内燃道岔打磨机	卖方: 842518	NCM-4.8型内燃道岔打磨机是适用于铁路行业的专用机械，该机主要用于钢轨道岔的养护作业，也可用于普通钢轨的养护作业。该机具有工作效率高、操作简便、上下道快速、适应范围广等特点，受到用户的广泛好评。
	72V智能锂电仿形打磨机	卖方: 842518	1. 72V锂电动力直流电控系统，带过流、过压、欠压、高温等安全保护功能 2. 双操作系统，既可以机械式摇轮进给，又可以电子进给 3. 电子进给分档式设计，不同打磨阶段，进给的精度不同，提供...
	36V锂电捣固镐	卖方: 842518	产品优点： 1. 智能数显，实时显示剩余电量和使用时间（业内首创） 2. 三级减震，减少操作者的工作疲劳 3. 电池通过UN38.3国际安全认证和GB34570双重安全认证 4. 高海拔正常使用...
	ND-5内燃冲击捣固镐	卖方: 842518	ND-5内燃冲击捣固镐是一种轻便高效的捣固工具，它具有结构紧凑、重量轻、效率高、操作简便、省力、减震效果好等特点，适用于多种路况的破碎及捣固作业。 适用于混凝土、砖石、沥青、岩石、泥土等破碎及...
	ND-4内燃捣固镐	卖方: 842518	内燃捣固镐是铁路道床养护的一种小型养路机械，主要适用于道岔及繁忙线路上利用列车间隔进行的捣固作业，它具有重量轻、体积小、性能优良、坏损率低、上下道方便迅速、操作轻便等优点。