Top Hammer Drilling Tools
Top hammer rock drilling toolsare kinds of rock tools widely used in top rock drillingapplications, such as open-pit mining, quarrying, underground mining, rock bolting, tunneling, and production drilling. The top hammer rods, top hammer tools, top hammer bitsinclude four parts: Drill bit, Drill rod, Shank Adapter, and Coupling Sleeve.
Top Hammer Drilling Tools
Top Hammer Rock Drilling Tools From Litian
Litian is a professional manufacturer of high-quality top hammer rock drill tools with optimal drilling hole quality, high stability, and long service life. The top hammer rock tool servicesare designed and produced to transmit high-frequency impact energy into the rock and minimize energy loss to improve the rock breaking rate, penetration rate, and productivity.
In terms of product consultation and rock tool services, we can select the most suitable rock drill tools and drilling construction schemes according to the user's construction conditions, rock type, mineral conditions and the drilling equipment, so as to help users improve drilling efficiency, reduce drilling costs, and achieve better comprehensive benefits and higher labor productivity.
What are the reasons that affect the service life of top hammer rock drilling tools?
①Raw material and technology
High-quality raw materials and advanced processing technology can guarantee the overall drilling quality of the rock drill tools from the source and prolong its service life. Choose qualified rock drilling toolsand rock drill accessoriesfrom large standardized manufacturers.
② Whether the rock drill tools assembly are concentric
When drilling rock, the shank adapter, the drill rod, and the couplings should be in concentricity. The misalignment of the three will cause bending and deformation of the top hammer drill tools, resulting in stress, resulting in the joint can not cooperate effectively, and causing looseness.
③ Improper use of rock drill tools
When connecting the top hammer rock drill tools, it is easy to damage the rock drill tools if there are mud and sand on the thread, or if there is no lubricating oil at the threaded connection. The combination using of the used drilling rig tool and the new drilling rig tool will shorten the service life of the drilling tool. In addition, the empty beating of rock drill tools should be avoided as far as possible.
④ Propulsion pressure and impact pressure
The propulsion pressure and impact pressure should be set within the rated pressure range.
If the propulsion pressure is too low, it will reduce the drilling penetration efficiency, cause the drilling tool assembly to loosen, and the transmitted energy will be lost, which will cause great stress and cause the instantaneous contact and separation of the contact and joint end faces. If the pressure is too high, the rotation speed of the drill bit is low, there is a danger of sticking, and the bending stress of the drill rod increases.
Improper adjustment of the impact pressure will directly affect the rotation speed and drilling efficiency, and will also affect the life of the drilling tool.
⑤ Rotation speed and rotation pressure.
The rotation speed should match the drill bit diameter and the impact frequency of the top hammer drill tool. The cemented carbide of the drill bit has to be rotated at an appropriate angle after each impact, so that new rocks are broken each time.
The normal rotary pressure can provide proper anti-sticking protection for the drill rod. The increment of rotary pressure is the key factor to maintain the tightness of the rock drill tools. if the tightness is not enough, it often causes heating of the joint, peeling off of the thread surface, early wear and even fracture of the thread.
As a drill rod factory, we have types of related products for sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
MF Rod | MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adap... |
 |
Retrac Button Bit | Retrac button bits are mainly used in loose rock mass with relatively broken rock. The retrac skirt design can assist in retrieving the drill tool,... |
 |
Litian Rock Tools | We are a Chinese manufacturer of rock drilling consumables tools for drill & blast and rock excavation industries. Our TBM cutters, top hammer ... |
 |
MF Rod | MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adap... |
 |
TBM Cutter | Tunnel boring machine cuttersreferred to as "TBM Cutters", are excavation tools installed on the cutter heads of tunnel boring machines and shield ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
