PAVERS SHOT BLASTING MACHINE
Sandblasting paversshot blasting machine is mainly used for surface roughening treatment of marbles, granites, concrete products, and natural stone. It includes stone shot blasting machineand concrete blasting machine. It provides twin advantage foremost subject field end provides outstanding appearance as a result of the rough surface and therefore the exposed aggregates. Second "roughened" surface has excellent non-slip properties.
Pavers Shot Blasting Machine Basic Specification
QGS Series Roller Conveyor Type for Pavers Length ≥60cm
The working principle of the paver shot blasting machine:
Paver Shot Blasting Machine is predominantly used to blast marbles, granites, concrete blocks to create an improved aesthetic appearance, taking out cement and making styling attributes such as granite chips visible. The working principle: different sized abrasive, thrown by the rapidly rotating blast wheel, is accelerated towards the surface being prepared. The huge impact force of the abrasive quickly etches a unique three-dimensional character of the surface. The products processed in this way have a high-quality surface appearance without overlapped and dead zone, it also has high production efficiency and low cost. Comparison with the old power blader and singeing process method, it has higher efficiency and lower cost, and if connected to our dust collector, the dust and contaminants will be recycled automatically at a very low dust emission level, which complies with EU environmental standards.
The concrete shot blasted paver blocks/stone blast machine can be integrated into a production line due to its modern control system with the relevant interfaces, different belt lengths and well-coordinated transfer stations (e.g. sheets or rollers).
Advantage of paver shot blasting machine:
Speed adjustment of conveyor and blast wheels is controlled through an Inverter.
The number and the position of the blast wheels can change depending on the geometry, customer requirement and on the workpieces, such as only the blasting of the upper side, or need to blast lateral side.
With proper regulated control and type of shot used in the shot blast machine, it is possible to produce different surface finishes to produce an "antique" effect on marble stones and ‘bush-hammering's effect on cement products.
All paver shot blasting servicesmachine with Blow-off station. After blasting, a blow-off station with a high-pressure blower removes the shot from the surface of the concrete blocks/stone. The nozzles are adjustable in height and therefore adaptable for the treatment of different concrete block/stone sizes.
If you want to know more about steel plate shot blasting and painting line, please visit our website.
在线联系供应商
Other supplier products
 |
ANCHOR CHAIN SHOT BLASTING MACHINE | The working principle for anchor chain shot-blasting machine is mainly by numerous high speed abrasive flow projection to the anchor chain surface,... |
 |
FLOOR SHOT BLASTER | Floor shot blasteris a kind of shot blasting machine for concrete floors, steel plates. The floor shot blaster can clean up the floatation and imp... |
 |
CONTAINER BLASTING ROOM | When factory space is at a premium or a temporary site is to be utilized our container blast roomsprovide an instant and economical solution. Shot ... |
 |
MESH BELT SHOT BLASTING MACHINE | Wire mesh shot blasting machineor wire mesh belt shot blasting machineis suitable for continuous blasting thin and collision-sensitive die castings... |
 |
TUNNEL TYPE SHOT BLASTING MACHINE Free Quote | Tunnel type shot blasting machineis a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type sho... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
