Wear Sub
During saver sub drillingoperation, major wear and tear wear often take place between drill pipes and casings. Wear sub is used to avoid the wear between drill pipes, tool joints and casings. With features such as compact structure and easy operating, wear sub can prolong the service life of drill pipe and casing and reduce the vibration and trembling of drilling tools. It can also limit the contact friction.
Features:
Our wear drill stem subsconsist of a highly wear rubber sleeve, a metal stiffening liner and a sub body. The rubber sleeve is installed in the middle of sub body and some clearance is given to allow sleeve to rotate freely. The rubber sleeves are made of rubber mixtures with good wear resistance.
During drilling operation, the rubber sleeve and sub body can make a relative rotation, rubber sleeve O.D is larger than drill pipe tool joint O.D, so the tool joint and drill pipes can not contact with casing. The rubber sleeve on saver sub will firstly contact with casing. When friction between rubber sleeve and casing takes place, wearing to casing can be reduced due to the rubber sleeve features such as wear and soft, at the same time, consumption to tool joints of drill pipes and drill string tools will be decreased.
Technical Specification:
|
Specification |
Body O.D.(mm) |
Sub O.D.(mm) |
Connection |
|
|
7Casing |
121 |
143 |
38 |
3 1/2IF |
|
9 5/8" Casing |
168 |
190 |
57 |
4 1/2IF |
|
178 |
197 |
71 |
5 1/2FH |
|
|
10 3/4" Casing |
180 |
225 |
71 |
4 1/2IF |
|
5 1/2FH |
||||
|
13 3/8" Casing |
228 |
285 |
71 |
5 1/2FH |
If you are looking for reliable oil well equipment manufacturers, please contact us, and we will do our best to meet all the needs of customers.
SAIGAO GROUPspecializing in design, research and development, processing and manufacturing, sales and export of machinery equipment, with leading products comprising various kind of mud pumps, down-hole motors, any kinds of screen pipes, cementing tools as well as any kinds of wellhead equipment.
在线联系供应商
Other supplier products
 |
BW600/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump | BW600/10 mud pump is horizontal three cylinder reciprocating single acting piston pump with high stability and high pressure. Advanced product des... |
 |
Hydraulic Liner Hanger Landing Collar | The landing collarcomprises housing, ball seat and latch. The latch holds ball seat through pins. After the hanger is set, pressure is applied to r... |
 |
Liner Wiper Plug | The Liner Wiper Plugmay be shear-pinned on the bottom of the setting tool. The conjunction with pump down plug keeps mud to be separated from cemen... |
 |
Circulating Swage | Saigao casing circulating swageis forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-... |
 |
Hydraulic Liner Hanger Landing Collar | The landing collar comprises housing, ball seat and latch. The latch holds ball seat through pins. After the hanger is set, pressure is applied to ... |
