EN 1661/14218 Flange Nuts
EN 1661/EN 14218hex flange nut is a nut with a wide flange at one end that acts as an integral washer. This serves to distribute the pressure of the nut over the part being fastened, reducing the possibility of damage to the part and making it less likely to loosen due to uneven tightening surfaces. These large flange nutare mostly hexagonal in shape and are made of hardened steel, usually plated with zinc.
EN 1661/14218 Large Hex Flange NutSpecifications
DIN EN 1661 Flange Nuts
EN 1661 - 1998 Hexagon Nuts With Flange
Equivalent norm: GB/T 6177.1, ISO 4161, ANSI/ASME B18.2.4.4M, NF E 25-406
lEN 1661 Hot Dipped Galvanized Flange Nut Dimensions
|
Legend |
Making |
|
P=pitch |
Carbon Steel:6,8,10,12 |
|
K=height of the nut |
Thread:6H |
|
D=the nominal diameter of the thread |
Surface:BLK,ZP,HDG,etc |
|
E=The length of the diagonal |
|
|
S=The length of the flat |
EN 14218 Flange Nuts
EN 14218 - 2003 Hexagon Head Nuts With Flange With Fine Pitch Thread
lEN 14218 Hot Dipped Galvanized Flange Nut Dimensions
|
Legend |
Making |
|
P=pitch |
Carbon Steel:6,8,10,12 |
|
K=height of the nut |
Thread:6H |
|
D=the nominal diameter of the thread |
Surface:BLK,ZP,HDG,etc |
|
E=The length of the diagonal |
|
|
S=The length of the flat |
As one of the fastener manufacturers, we provide fastener material, heavy hex nuts, structural nuts, hexagonal nut with collar, etc. For different types of fasteneror more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
All Threaded Rods | In the nearly 20 years that DATIAN (DT) Fasteners has specialized in the production of stainless all thread rod . Many customers would love to purc... |
|
|
EN 1661/14218 Flange Nuts | EN 1661/EN 14218hex flange nut is a nut with a wide flange at one end that acts as an integral washer. This serves to distribute the pressure of th... |
 |
Flange Nut | The proportion of wholesale hex flange nutsproduction of DATIAN (DT) Fasteners is increasing year by year. Compared with the normal hexagon nuts, t... |
 |
Self Locking Domed Cap Nuts | DATIAN Fastenersis also a manufacturer of self-locking domed cap nuts. In recent years, dome nuts and boltshave been widely used, and the common on... |
 |
DIN 314 Wing Nuts | DIN 314wing screw nut is easy to install and disassemble, and it can be screwed directly by hand, so some people also call it a hand-tightened nut.... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
