Core barrel with high performance rock roller bit for Pile Foundation
Overview of Roller Bit
The roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and efficiency.
There are three types of core barrel for sale:
lCore barrel with bullet teethis used for cutting an annular ring in rock or concrete(also reinforced concrete).
lCore Barrel with roller bits is used in very strong rock formations(compressive strength >100Mpa).
lCross cutter core barrel is mainly used to break rock cores that remain in the borehole after using a core barrel, also suitable for drilling hard, jointed rock(<100Mpa) and for penetrating through layers containing boulders.
Applicable layers: dense sand, gravel, and medium hard rocks, etc..
The Advantage of Core Barrel RollerBit
The reaming bit consists mainly of four or more cones. The main cutting teeth are new wear-resistant alloys for tungsten carbide inserts and steel teeth. The new formula and the new process of high-quality tungsten carbide teeth improve the service life of the reaming drill. The guide is a cone drill bit or a scraper drill bit.
The bearing seal uses high-performance O-ring seal or metal seal bearing and special grease for imported drill bit.
Special inserts are placed on the outer diameter of the head to reduce the wear of the head during the formation of abrasives in directional and horizontal wells, prolonging the life of the drill.
Replacing Cutters and Cutting Cost-On most Hole Opener designs, the cutters can be easily replaced. The cost to replace a cutter is a fraction of the cost to replace a large barrel drill bit.
Great Drill Bitsis a drill bit manufacturer, we have china hammer drill bitfor sale, rock drill bit, wholesale roller bit core barreland etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
PDC Bit | PDC Bit PDC bit is short for Polycrystalline Diamond Compact bit. The other name for the PDC bit is Diamond bit. As one of the most professional P... |
 |
Bi-center Bit | Bi-center bit for Mining Machinery and abrasive formation Overview of Bi-center Bit This type of Bi-center bit mainly used for medium to medium-har... |
 |
Roller Bit | GREAT has customized manufacture several types of roller bit. It is including 90 ° U-shaped Roller Bit, 120 ° U-shaped Roller Bit. All thes... |
 |
Steel Body PDC Bit | The Steel body PDC bit body is made of AISI 4145H round steel. The cost of Steel body PDC bit is lower than that of Matrix body PDC bit. Every S... |
 |
The Application Field and the Drilling Technology of the Roller Cone Bit | The single roller cone bits rock by crushing and shearing. The cone is rolling at the bottom of the well, so the requirement for the torque is smal... |
