Automatic Pipe Saw Machine

Features of Pipe Saw

Hydraulic operated pipe saws, especially used for the preparation of pipe segments in PE, PP and other thermoplastic materials for the production of bends, tee and other manufacturing. the reduction rate of the saw is hydraulically controlled like the belt clamp used for fixing the pipe section. The saw blade is made in Germany.

Hydraulically raised and lowered cutting cycle;

67-degree maximum cutting angle allows the production of segments for bends, tees and Y-branch tees;

Angular cutting error equal to or less than 1 degree;

Speed of saw blade 195m/min;

Pipe clamping straps.

Types of Automatic Plastic Tube Cutting Machinefor Sale

LHC 315 Pipe Saw

LHC315 pipe saw is used for the production of bends, tees and other fabrications and for the production of Bends, Tees, crosses, Y and other fabrications.

LHC 800 Pipe Saw

LHC800 hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of Bends, Tees, Cross, Y and other fabrications.

LHC 1200 Pipe Saw

LHC1200 hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of Bends, Tees, Cross, Y and other fabrications.

LHC 1600 Pipe Saw

LHC1600 hydraulically operated pipe saw is specially used to prepare pipe sections of PE, PP and other thermoplastic materials, and is used to manufacture elbows, tees, crosses, Y-shaped pipes, etc.

LHC 2000 Pipe Saw

LHC2000 hydraulically operated pipe saw is specially used to prepare pipe sections of PE, PP and other thermoplastic materials, and is used to manufacture elbows, tees, crosses, Y-shaped pipes, etc.

FAQs of Pipe Saw

Malfunction analyzes:

① Pipes cannot be clamped.

② Pressure relay is not adjusted well.

③ The clamping cylinder is leak.

Solutions:

① Adjust the clamping pressure;

② Adjust the pressure relay;

③ Replace the oil ring

Malfunction analyzes

① System pressure is too high or low;

② Throttle valve is adjusted improperly;

③ Controllable cheek valve is adjusted improperly.

Solutions

① Adjust the system pressure;

② Adjust the throttle valve;

③ Adjust the single direction valve.

Malfunction analyzes

① The overflow valve core is blocked

② Oil filter is blocked.

③ Overflow valve core is blocked

Solutions

① Disconnect & wash or change the overflow valve

② Wash the oil filter.

③ Disassemble and clean the overflow valve core.

Now the price of plastic pipe fusion welding machineis reasonable, if you have needs to buy a pipe cutting machine china, please contact us.

Other supplier products

	CNC Welding Machine	Features of Automatic Tube Welding Machine CNC Automatic Butt Welding Machine is suitable for HDPE/PP pipes and fittings of gas pipeline. The heat...
	Plastic Pipe Welding & Cutting Machines	LHY 160 Hydraulic Butt Welding Machine LHY160 Hydraulic Butt Welding Machine is suitable for PE & PP pipes and fittings from 50mm to 160mm OD ...
	CNC Welding Machine	Features of Automatic Tube Welding Machine CNC automatic pipe welding machineis suitable for HDPE/PP pipes and fittings of gas pipeline. The heati...
	Automatic Pipe Saw Machine	Features of Pipe Saw Hydraulic operated pipe saws, especially used for the preparation of pipe segments in PE, PP and other thermoplastic material...
	PPR Welding Machine For Pipe	Compared with the traditional cast iron pipe, galvanized steel pipe, cement pipe and other pipes, PPR pipe has the advantages of saving energy and ...

供应产品

Same products

	GT-FM24-PLC填粉机机(3+9+9+3)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing	卖方: Eurion Automation Co., Ltd.	高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ...
	GT-FM18-PLC灌装机(8+2+8)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	48工位填粉机 GT-FM48	卖方: 肇庆古雷特科技有限公司	* 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
	8工位填粉机 GT-FM8	卖方: 肇庆古雷特科技有限公司	* 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...