WHAT IS MULTI-AXIAL SIMULATION TABLE?
Multi axial simulation table(MAST) simulates the vibration of real-world environments in the laboratory. Element provides multi-axial vibration testing for a full range of vehicle components and assemblies, delivering the data that automotive engineers need to develop safer, more reliable, and dependable vehicles and their associated components.
A multi axis simulation table is an automotive test system specifically designed for the high-frequency testing of vehicle components. It is sometimes also called a Multi-Axis Shaker Table or MAST table.
They can simulate acceleration and displacement outputs and reproduce key data collected on proving grounds, by providing a full six degrees of freedom (6 DOF).
These test systems consist of a hexapod platform with a low resonance table on top. The test system can be used to simulate any kind of vibration in all six degrees of freedom.
The movements of the test system are tightly controlled by a digital test controller.
WHAT APPLICATIONS FOR MULTI-AXIAL SIMULATION TEST?
The Multi-Axial Simulation Table(MAST Table) is applicable for:
Seismic: earthquake testing
Aircraft, vessel, helicopters taking off and landing
Docking of spacecraft
Refueling of aerial tankers.
Automotive vibration
Simulation of ground, ship or floor movements
Imbalance in loading and unloading and wind
Long-term swaying of the ship
Modal analysis
WHAT’S THE MAIN APPLICATION OF 3-DOF SIMULATION TABLE?
KRD60 3-DOF simulation table is the key equipment for dynamic performance test of shipboard equipment, which is used to simulate the motion attitude of submarine and ship in the sea environment. It can also be used to test the adaptability of the main parts of the automobile to the tilting and swing environment, so as to determine the ability of the product to withstand the tilting and swing of the specified severity level and the integrity of the structure. It is widely used in the performance test of shipborne photoelectric equipment, navigation equipment, gyroscope and platform compass.
It can save a lot of manpower, material and financial resources, and shorten the development cycle of products. Using this technology to develop different simulators can be applied to aviation, aerospace, weapons and other industries. Tilt and sway is a basic environment for machinery, electrical and electronic products placed on water equipment (including ships, seaplanes, and offshore oil exploration platforms). All types of machinery, electrical and electronic products placed on water equipment must withstand the effects of the environment.
For more information about mechanical testing systemand shock testing machine, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Constant Acceleration Tester | WHAT IS CONSTANT ACCELERATION TEST? Centrifugal constant acceleration testis performed to evaluate when components, equipment, and other electrica... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the-art design, high degree of automation, simp... |
 |
WHAT IS MULTI-AXIAL SIMULATION TABLE? | Multi axial simulation table(MAST) simulates the vibration of real-world environments in the laboratory. Element provides multi-axial vibration tes... |
 |
KRD16 HIGH IMPACT SHOCK TEST SYSTEM | KRD16 series shock test system is a standard testing machine stipulated by the high impact shock test method and meets MIL-S-901D standard which co... |
 |
KRD14 PNEUMATIC VERTICAL SHOCK RESPONSE SPECTRUM TEST SYSTEM | KRD14 series shock response spectrum test system is full pneumatic driven vertical lifting SRS test equipment with special design, easy operation, ... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
