GKH AUTOMATIC SIPHON HORIZONTAL SCRAPER CENTRIFUGE
This screen centrifuge is controlled by PLC and regulates the speed by frequency convertor. The braking system of continuous centrifuge applies dynamic braking and regenerative braking, the whole separation process is an automatic circulative process and the manual operation mode is applicable to be changed over from automatic operation mode.
GKH Series automatic siphoncentrifuge is more suitable for separating such products as small solid-phase granularity and which is hard to be separated. It is widely used in the pharmaceutical, chemical, and foodstuff industries (e.g. starch, calcium phosphate, sodium bicarbonate).
SIPHON SCRAPER CENTRIFUGEWORKING PRINCIPLE
Centrifuge is a separation machine which achieves solid-liquid separation by the centrifugal force. It runs continuously with interval discharging. The feeding pipe starts to feed when the drum revolves at a certain speed. At this time, the siphon pipe locates in a certain area of the siphon room. The product will be sprayed evenly on the drum wall through the feeding pipe while the filtering liquid will be drained into the siphon room through the filtering net, mesh and the holes in the drum bottom.Then the filtering liquid will be extracted outside through the siphon pipe. The solid will be left on the filtering mesh. After a period of spinning, the scraper will move to peel down the products from the drum wall and enter into spiral discharging device and then go to outside.
SIPHON CENTRIFUGE MAIN CHARACTERISTICS
This kind of centrifuge consists of a drum, scraper system, siphon system, skimming system, back flushing system, bearing seat, transmission system, floating platform (prepared by the user), controlling system and etc. The shell and connecting plate are welded together, with strong intensity. The centrifuge can be installed wholly on the floating platform by connecting terrace, which will is steady and disassemble. And there are damping shock absorbers installed at the bottom of the platform.
GKH HORIZONTAL SCRAPER CENTRIFUGE APPLICATION
This siphon peeler centrifugehas been used in corn starch, tapioca in Indonesia, Thailand, India, Cambodia etc.
For more information about peeler centrifuge operationand peeler centrifuge working principle, please feel free to contact us!
Saideli, as an excellent centrifuge supplier, offers a wide range of centrifuge separation equipmentfor you to choose from.
在线联系供应商
Other supplier products
 |
FSD CENTRIFUGAL DRYER | This industrial centrifugal dryerintegrates separating, drying, sterilization, with a perfect seal system, absolute security and is particularly su... |
 |
INDUSTRIAL CENTRIFUGAL DRYER | Industrial centrifugal dryerintegrates separating, drying, sterilization, with perfect seal system, absolute security and is particularly suitable ... |
 |
LGZ AUTOMATIC SCRAPER BOTTOM DISCHARGE CENTRIFUGE | In accordance with users' demand, L(P)GZ bottom discharge centrifuges' procedures such as feeding, separating, washing, dehydrating, and dischargin... |
 |
Products | SAIDELI-INDUSTRIAL CENTRIFUGE SEPARATOR MACHINE MANUFACTURER Jiangsu Saideli, an industrial centrifuge machine manufacturer, continuously develops... |
 |
APPLICATION OF CENTRIFUGATION IN PHARMACEUTICAL INDUSTRY | GMP and FDA requirements must be met by pharma centrifuge during the manufacture of active drug substances. The shadow of centrifuge can be seen in... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | 卖方: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
