Apollo AK Two-chuck Tube Laser Cutting Machine 1000w-6000w

Remcor technology is a global supplier for the turnkey fiber laser cutting lines, which have around 18 years experiences, 5000 sets installations globally. No matter what type what size and how thickness your sheet material is, we can provide you the suitable equipment. Pipe Fiber laser cutting machine mainly been applied in metal pipes and tubes fabrications, with the character of fast speed, high precision or accuracy, environmental friendly, low power consumption, low table cost, and low maintenance cost. which is widely applied in fast cutting metal pipes of steel, stainless steel, carbon steel, aluminum, copper, galvanized steel, titanium alloy, gold, silver and other material. OEM ODM services are available.

Heavy Duty bed, apply the fully plate welding bed, with higher rigidity and durable use.

Compared with two chuck clamping or traditional metal pipes cutter. Three chucks equipment can realize the real zero tailing .processing details as the following descriptio.

More flexible for pipe cutting processing especially for extra heavy duty pipes or tubes, less swing or shake.Perfect accuracy and precision.

Heavy duty type load longer tailing material avaliable.

Apollo AK Two-chuck Tube Laser Cutting Machine 1000w-6000w Parameter Details

APOLLO BK SERIES-3 Chucks
Type	6020-BK	7025-BK	9025-BK	9034-BK
Power Range	1500-6000W
Chuck Structure	3 chucks
Tube Size	Round Type: 15-200mm Square	Round Type:15- 245mm	Round Type:15- 245mm Square	Round Type:15- 330mm Square
	Type:15- 140mm	Square Type:15- 175mm	Type:15- 175mm	Type:15- 230mm
Positioning accuracy of X& Y
Max Positioning speed X&Y	100m/min			80m/min
Max cutting length	6000mm	7000mm	9000mm	9000mm
Tail length	2 0mm
Max weight single tube	135KG	260KG	260KG	500KG
Max loading length	6000mm	7000mm	9000mm	9000mm

Fully Annealed Table

The bed body adapts the segmented rectangular tube welding bed with fully annealed treatment at over 600⁰. After tempering, the strength, rigidity and stability are guaranteed, the precision would be tested and debugged which can make sure the precision can be maintained for a long time. The table is equipped with automatic lubrication device, which ensure the moving parts operate in good condition and improve the service life of guide rails, gears and rack.

Follower Support

The follower support device will be optional. The follower support is mainly to assist in controlling the excessive deformation of cutting longer pipes (pipes with smaller diameter), and the servo motor drives the up and down movement of the pallet assembly. When the chuck moves to the corresponding position, the auxiliary support automatically drops for avoidance.

Smart Auto Focus Laser Head

Standard auto focus function, no need focus adjustment while changing sheet; Automatic tracking and accurately adjusting the focus according to the material thickness to ensure the best cutting effect of the whole board. Shorter perforation time, better perforation quality, high-speed cutting, saving time.

Intelligent CNC Operating System

It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks on big IPAD Screen. Realize the intelligent diagnosis, multi-threading operation, three-level perforation, laser energy control, adaptive edge-finding, automatic corner acceleration and deceleration, flight cutting, switching worktables, mechanical accuracy compensation etc.

Pneumatic Clamp Chucks

Pneumatic clamp design on both sides. The dual-chucks help reduce tube vibration to a minimum, guaranteeing high accuracy in even complex tube configurations at high cutting speed. Suitable for cutting a range of tube diameters from Ø20 mm to Ø220 mm and various wall thicknesses.

Front chuck

tube laser cutting machine front chuck

Back chuck

tube laser cutting machine back chuck

Fractional Automatic Support Technology

Applies the intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Equipped with two sets of variable-diameter support structures, which are automatically lifted by the cylinder to avoid the rear chuck in processing. When processing profiles with different diameters, manually turn the variable-diameter wheels to achieve fit and support for different-sized profiles. The variable-diameter wheels It can be supported every two degrees of rotation to reduce the diameter of the circumscribed circular tube by 2mm

We can offer kinds of 2000w laserfor sale, and the 2kw fiber laser priceis reasonable, if you have needs to buy high quality 2kw fiber laser cutting machine, please contact us.

As one of metal laser cutter manufacturers, we will do our best to meet all the needs of customers.

Other supplier products

	Tube Laser Cutting Machine	Tube Laser Cutting Machine Remcor steel pipe laser cutting machine solutions can certainly meet all of your metal laser steel pipe cutting demands....
	Mild Steel Laser Cutter	Carbon steel or mild steel is the mostly used metal in sheet fabrication. Commonly used structurally in buildings and bridges, axles, gears, shafts...
	Professional Laser Welding Machine	As a laser welding machine company, Remcor offers the professional welding machines which is 3-5 times faster than traditional argon or tig mig wel...
	AC Type Vacuum Suction Lifter	The electric type of vacuum suction device can be applied in feeding and blanking of the glass, sheet metal, marble, etc. material. The maximu...
	3 in 1 Laser Cutting Cleaning Welding Machine	Remcor 3 in 1 laser welding machineand cleaning machine integrates three functions. One machine can get the multi-purpose, it's much more cost savi...

供应产品

Same products

	GT-FM24-PLC填粉机机(3+9+9+3)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing	卖方: Eurion Automation Co., Ltd.	高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ...
	GT-FM18-PLC灌装机(8+2+8)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	48工位填粉机 GT-FM48	卖方: 肇庆古雷特科技有限公司	* 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
	8工位填粉机 GT-FM8	卖方: 肇庆古雷特科技有限公司	* 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...