Industrial Microwave Magnetron WG Launcher
Dolph Microwaveproduces waveguide components for both high-end and simple microwave plasma applications. Microwave components for industry microwave is 915 and 2450MHz. Taking the WR340(2450MHz) for example.
FAQs of Industrial Microwave Magnetron WG Launcher
Introduction of Industrial Microwave Magnetron WG Launcher
The Industrial Microwave magnetron launcheris the mounting point for the magnetron and is used to couple microwave energy from the magnetron antenna into the waveguide system. It is a small section of closed-segment waveguide with holes, the holes of which are used for the output stubs of the magnetron. Industrial Microwave Magnetron WG Launcher are designed for magnetrons, matching their mechanical dimensions, while providing the required VSWR and phase. This ensures optimum operation and efficiency of the magnetron.
Work Principle of Industrial microwave launcher
Guided modes are created in the waveguide. The microwave source radiates in the confined space of the inner wall of the waveguide to generate the desired mode.
There are many waveguide switches manufacturers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
Double Ridged Waveguide Tees | Dolph Microwave provides a series of high-performance waveguide tees, power divider, and combiner products. By connecting a load to the E and H pla... | |
Industrial Microwave Circulator | Dolph Microwave offers a standard product line of Industrial Microwave Circulator for 915 and 2450MHz. Using standard waveguide flange, the product... | |
Waveguide Attenuators | Dolph Microwave offers different types of waveguide attenuators. Typical Attenuation values are 3dB, 6dB, 10dB, 20dB and 30dB (other attenuation va... | |
Industrial Microwave Sliding Short | Dolph Microwave manufactures the Industrial microwave shortfor 915 and 2450 MHz. We also supply other special configurations to meet customer's spe... | |
Double Ridged Waveguide Tees | Dolph Microwave provides a series of high-performance waveguide tees, power divider, and combiner products. By connecting a load to the E and H pla... |
Same products
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数,合理的设计使它具有重量轻、操作方便、读数直观的特点。 | |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件,依靠尖轨的扳动,将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展,加速了道岔尖轨的磨损和报废,特别是尖轨的侧磨较为严重,要经常测量尖轨的磨耗状态,给出... | |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值,侧面磨耗值和尖轨降低值。釆用数显读数,合理的设计使它具有重量轻、操作方便、读数直观的特点。 | |
数显式 辙叉结构高度测量器 | 卖方: 842518 | LJ-ZC-A钢轨辙叉磨耗测量尺主要以辙叉两边的翼轨未磨耗面做为磨耗测量的基准面,分别测量辙叉心宽40mm断面处辙叉心垂直磨耗和翼轨垂直磨耗量。 | |
尖心轨降低值测量尺 | 卖方: 842518 | 辙叉垂直磨耗测量尺用于测量辙叉心轨与翼轨磨损段任意部位的垂直磨耗值及心轨相对于翼轨的缩减值,具有测量精度高、现场工人容易掌握、可靠性高、体积小、重量轻等显著优点。 |