Horizontal Double Wall Corrugated Pipe Extrusion Line
This newly developed horizontal double wall corrugated pipe production line adopts pressure water cooling system, based on advanced extrusion technology, enable to produce corrugated pipe from diameter 40mm-1500mm. There are a variety of types of extruders to choose, which can achieve the production of various HDPE, PP corrugated pipe, also can meet the production demand of single-wall corrugated pipe. We have been committed to promoting the development of corrugated pipe extrusion technology and providing complete solution to customers for over 25 years.
Advantages of Horizontal Double Wall Corrugated Pipe Extrusion Line
Sizing sleeve is made of aluminum alloy, highly wear-resistant.
The pipe waveform can be calculated by special software program, and the ring stiffness has been better.
The sliding base of forming machine is geared type and equipped with large size needle roller bearing, which improves the bearing capacity of the sliding base. More stable operation, longer life.
Production line is fixed center height, and there is no need to adjust again when changing model.
Common production line modules with different specifications. Quick unloading module design makes module loading and unloading convenient and fast. The unique internal module cooling design enables the cooling water to flow rapidly, internal module realizes the rapid cooling and shaping of pipes. The main drive is driven by a two-speed motor, which can realize stable and accurate operation.
Using advanced PLC and color LCD control system, which can be adjusted by single machine, linkage of all lines, simple operation, stable and reliable production, high degree of automation, automatic fault alarm.
In addition to single screw extruder, conical twin screw extruder and parallel twin screw extruder can be used in this production line. All three kinds of extruders are produced by JWELL, with precise electronic control, good plasticizing and stable operation, which can meet the needs of different customers.
For more information about dwc pipe manufacturing machineplease feel free to contact us!
在线联系供应商
Other supplier products
 |
PP-R, PE-RT, PE-X Cool & Hot Water Small Pipe Extrusion Line | PP-R, PE-RT, PE-X Cool & Hot Water Small Pipe Extrusion Line Our High quality PP-R, PE-RT, HDPE cool cold and hot water ppr pipe extrusion mach... |
 |
PVC Wall Panel Extrusion Line | PVC Wall Panel Extrusion Line JWELL Machinery specializes in complete solutions for various PVC wall panel extrusion lines, from plant planing to ... |
 |
TPO PVC EVA HDPE Waterproof Geomembrane Sheet Extrusion Line | With over 25 years experience and have ranked No.1 in the plastic extrusion industry for 11 consecutive years, accumulating rich manufacturing expe... |
 |
PVC Wall Panel Extrusion Line | JWELL Machinery specializes in complete solutions for various PVC wall panel extrusion line, from plant planing to final profiles. This high-speed ... |
 |
PET PLA Sheet Extrusion Line | We are professional at manufacturing complete pla sheet extrusion lineand china pet sheet extrusion linewith over 25 years' rich experience, highly... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
