.

Liner Wiper Plug

The Liner Wiper Plugmay be shear-pinned on the bottom of the setting tool. The conjunction with pump down plug keeps mud to be separated from cement and removes the cement from the inside of the liner.

The Saigao latch-in liner wiper plug is similar in design to the standard landing collar and float collarand has the same function of wiping the liner of excess cement. The primary difference is that it has a latch-in nose assembly located at the bottom of the plug. After wiping the liner the plug lands in a landing collar located near the bottom of the liner. The plug nose has a snap ring that latches into the landing collar, thus locking the wiper plug and drill pipe dart tandem in place. This ensures that the plugs will not move during subsequent operations. The landing collar serves a second purpose in that it has a function similar to that of a float collar. The float collar contains a valve that allows the cement to flow to the bottom of the liner and through the float shoe. Once the cement job is complete the valve in the float shoe closes so cement doesn’t come back up the liner. If the float shoe fails the valve in the float collar acts as a back up to the float shoe. Once the plug assembly latches into the landing collar it effectively closes off any pathway for fluid flow. Therefore a wiper plug landing collar can effectively be used in place of a standard float collar. The landing collar is an additional item that is used only with the latch-in wiper plug. All materials in the cement wiper plugand landing collar can be easily drilled out later.

Technical Parameters of Liner Wiper Plug

Specifications, mm

Φ177.8

Φ139.7

Φ127/Φ114.3

Φ101.6

Φ88.9

Shearing Pressure, MPa

12

12

12

12

12

Φ55

Φ50

Φ42

Φ35

Φ32

Back-pressure, MPa

25

25

25

25

25

For more about oilfield cementing tools, contact us.


在线联系供应商

至: SHANDONG SAIGAO GROUP CORPORATION
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

LM-T Type Releasing Casing Spear
LM-T Type Releasing Casing Spear LM-T Releasing Spear is a fishing tool that can catch the drill pipe, tubing and casing from those tools' internal diameter. The releasing spear ca...
Choke Manifold
Choke Manifold Choke Manifold control and implementation of oil and gas pressure control technology. In case that the BOP is off, the pressure at the bottom of we...
Mud Pump Parts
Mud Pump Parts Mud pump spareparts(mud pump spares) are used on drilling rigs for the circulation of mud. These reciprocating pumps are suited for the process of ...
BW160/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump
BW160/10 Horizontal Three Cylinder Reciprocating Single Acting Piston Pump BW series mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy and hydropower, bridges, high-rise buildings, foun...
Hydraulic Liner Hanger Tie-Back Assembly
Hydraulic Liner Hanger Tie-Back Assembly The tie-back assembly is a special cementing tool for tieback operation. Tieback equipment allows existing liners with a receptacle to be extend...
供应产品

Same products

Sling webbings automatic cutting and winding machine
Sling webbings automatic cutting and winding machine 卖方: 864244 Sling webbings automatic cutting and winding machine New Type sling webbings automatic cutting a...
label ribbons calender machine
label ribbons calender machine 卖方: 864244 label ribbons calender machine Item No:KW-900-W300 This is a kind oflabel ribbons calender ma...
Automatic elastic tapes/laces silicone coating machines
Automatic elastic tapes/laces silicone coating machines 卖方: 864244 Automatic elastic tapes/laces silicone coating machines Item No.: Kw-200 This is a kind of auto...
elastic tapes pre-shrinking machine
elastic tapes pre-shrinking machine 卖方: 864244 elastic tapes pre-shrinking machine Item No:KW-210 This is anelastic tapes pre-shrinking machin...
Starching And Finishing Machine
Starching And Finishing Machine 卖方: 864244 Starching And Finishing Machine Item No:KW-710A Application:this machine is widely used for thi...