Metallurgical Furnace

CIC main advantage in nonferrous metallurgical furnacelies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blown furnace. Rotary furnace is the main metallurgy furnaceequipment used to treat copper and nickel sulfide in nonferrous metallurgical production. The rotary furnace does not need fuel, and only relies on the heat released by the oxidation reaction of iron and sulfur in copper and sulfur with the air blown into the heavy equipment and machinery solution to provide all the heat expenditure.

Instruction of Metallurgical Furnace

Rotary refining furnace is mainly used for refining liquid crude copper and copper mining process. The refining operation generally includes four stages: feeding, oxidation, reduction and casting. The product is to provide a qualified anode plate for copper electrolytic refining. Therefore, rotary refining furnace is also called a rotary anode furnace.

The main characteristics of rotary refining furnace are simple structure, large furnace capacity, high degree of mechanical automation, strong controllability, good sealing and low energy consumption. Rotary refining furnace is mostly used in pyrometallurgical refining of large or extra large copper smelters.

Structure of Metallurgical Furnace

The horizontal rotary furnace is a kind of smelting equipment for blowing matte or nickel into coarse copper or high matte in the smelting process of non-ferrous metals such as copper and nickel. Its specification is expressed by the output of each furnace. The furnace body is cylindrical (see Fig. 1), and a furnace mouth is set in the middle for charging, smoke exhaust, slag discharge and discharging. A row of tuyeres is set at the furnace side along the horizontal direction to blow in the air. The lining of the horizontal converter is made of magnesia or chrome magnesia refractory.

Rotary refining furnace is mainly composed of furnace body, supporting device, drive and control system. The main supporting equipment includes combustion device, combustion air system, oxidant, reductant, steam, compressed air, cooling water and process piping (as shown in Figure 2 below).

The cylindrical furnace body is provided with a furnace mouth for charging and discharging copper. The furnace mouth is equipped with a furnace cover. The furnace cover is only opened when charging and discharging copper. The melting period, oxidation period and reduction period are all covered. A small amount of tuyere is set on the side of the furnace body, high-pressure air is introduced in the oxidation period, and the reducing agent is introduced in the reduction period. When the tuyere is not in operation, it is placed above the melt surface. When the redox operation is carried out, the furnace is tilted to make the tuyere embedded in the melt. The rotary refining furnace needs an external heat supply, so it is equipped with a fuel combustion device and exhaust port.

Related Issues of Metallurgical Furnace

What are the masonry methods of the horizontal rotary furnaces?

There are two kinds of masonry methods: rotary furnace body construction method and arch tire construction method. The construction procedure is to build the end wall first, then the circular liner, and finally the furnace mouth. Before the liner of the furnace is built, the driving device of the furnace body must pass the trial operation and be locked; The gap between the end cover of the furnace shell and furnace body should be plugged with asbestos rope. The circular liner and end wall shall be dry laid with staggered joints, and the brick joint shall not be greater than 1.5 mm. The staggered joints between tuyere and furnace mouth shall be wet-laid, and the brick joint shall be no more than 2 mm.

What are the construction preparations for the rotary refining furnace?

The refining furnace is a complete set of equipment in the smelter, which is used together with a smelting furnace and rotary furnace. Generally, one smelting furnace is equipped with three rotary furnaces and two refining furnaces. Due to the simple shape of rotary refining furnace and there are not many brick types involved, except for a small number of special-shaped bricks at the furnace mouth, redox mouth, copper outlet and other parts, most of them are standard bricks, so the construction is relatively simple. The amount of maintenance is not very large, and the number of maintenance is less than that of the rotary furnace. Some fixed construction facilities of smelting furnace and rotary furnace and the working platform around refining furnace can be used.

Before the construction of the rotary refining furnace, the inner diameter of the metal shell, transmission device, supporting device, the control system must be carefully checked, and the furnace can be built only after it is confirmed to be completely normal.

Case Parts of Metallurgical Furnace

Equipment	Type	Name of Client/Project
Rotary Furnace	Φ4.4×14.6	China Nerin Engineering Co., Ltd
	Φ4.2×14	China YUN Copper Co., Ltd
	Φ4.5×14.5	China Nerin Engineering Co., Ltd
		Aluminum Corporation of China
Rotary Refining Furnace	Φ4.5×13.5m	China YUN Copper Co., Ltd
		Chinalco Southeast Copper
		Lufang Shandong,China
	Φ4.2×13.5m	Yuguang Gold & Lead Henan China
		Qinghai Copper
		Guangxi Nanguo Copper
		China Nerin Engineering Co., Ltd
		China YUN Copper Co., Ltd
	Φ4.2×13 m	China Nerin Engineering Co., Ltd
	Φ2.4×3m	China Nerin Engineering Co., Ltd
Bottom Blown Furnace	Φ5.2×23m	Yuguang Gold & Lead Henan China
	Φ4.8×23m	Dongying Lufang, Shandong, China
	Φ4.4×13.5m	China YUN Copper Co., Ltd (Yimen)
	Φ3.6×16m	Neimenggu Ruifeng Co., Ltd
	Φ3.6×14m	China-Tin Group
	Φ3×14.6m	Lead Industry in Chenzhou, Hunan Province
	Φ3×13.5m	Shandong Fangyuan Non-ferrous Metals Group
	Φ3×11m
	Φ3×8m	Yuguang Gold & Lead Henan China

Application

Metallurgy

Waste Treatment

There are many heavy machinery manufacturers, but we are one of the best choices for you.

Other supplier products

	Metallurgical Furnace	CIC main advantage in nonferrous metallurgical furnacelies in the manufacture of horizontal rotary furnace, Rotary refining furnace and bottom blow...
	Overflow Ball Mill	In recent years, with the continuous development of grinding technology, wet grinding has become the mainstream process, overflow type ball millis ...
	CIC Customized and Intelligent Equipment in Cement Industries	As a kind of building material, cement is widely used with large demand and fierce competition in the industry. As the leader of cement producti...
	Thrust Roller	CIC is a more than 30-year manufacturer and reputed supplier of thrust rollerused in rotary kilns, rotary type driers and so on. CIC has been speci...
	Horizontal Centrifuge Machine	TWZ series horizontal vibratory centrifuge belongs to the centrifugal dewatering machine, the series of horizontal vibratory centrifuge is mainly u...

供应产品

Same products

	GT-FM24-PLC填粉机机(3+9+9+3)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing	卖方: Eurion Automation Co., Ltd.	高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ...
	GT-FM18-PLC灌装机(8+2+8)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	48工位填粉机 GT-FM48	卖方: 肇庆古雷特科技有限公司	* 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
	8工位填粉机 GT-FM8	卖方: 肇庆古雷特科技有限公司	* 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...