Two Part Meter Dispensing Machines Potting Ab Part Epoxy Resin Meter Mixing Dispensing Machine 2K DOS Epoxy Machine
ab glue mixing and dosing machine
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
General description of the machine
our ab dosing dispensing machine precisely metering, mixing and dispensing two-component medium to low-viscosity materials for potting, dispensing ,sealing, casting ,encapsulation and filling.
For variable ratio dispensing, the system handles ratios from 1:1 to 10:1.
The system is composed of AB tanks, metering pumps and motor, mixing pipe, dual valve, dynamic motor for dynamic stirring and 3-axis robotic platform.
Two kinds of component materials are separately before they mix in mixing tube to avoid glue cure in system. Dispensing valve is with suck-back function to keep thin fluid from dripping.
Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
6 Tank with heater which can preheat materials to assure good flowability .
our Pump technology
Valve technology
1. Dynamic mixing with stirring detecting function that ensure glue mixing evenly .
2 Stainless design of the glue touch surface to capture more higher material compatibility .
3 Glue valve with flow-back prevent function that can prevent glue from dropping when stop gluing .
4 Sealing parts of rod shaft adopt imported parts to keep more higher durability .
5 The self-cleaning function make machine cleaning more easier that you needn't dis-assembly the parts to wash . Cleaning time and cleaning times could be set in the touch screen.
detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation ..
在线联系供应商
Other supplier products
 |
Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light | Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light Potting and encapsulation is the proces... |
 |
Fully Automatic Glue Spraying Machine for Honeycomb Panel PVC Sandwich Panels | Fully Automatic Glue Spraying Machine for Honeycomb Panel PVC Sandwich Panels The glue Spraying line is based on the reform of the traditionalro... |
 |
Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying | Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying The glue Spraying line is based on the reform of the t... |
 |
Two component Dispensers for Volumetric Micro-Dispensing Systems | Information about Meter Mixing/Dispensing Machines for 2-Part Polyurethane Casting Resins Two-part polyurethane casting resin systems may be proce... |
 |
IMPREGNATION POTTING AND DISPENSING: METHODS, MACHINES AND APPLICATIONS | Dispensing, in industry and production contexts, represents an impregnation and encapsulation process with the aim of applying resins in the windin... |
Same products
 |
Shoes Flexing Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Shoelace Abrasion Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Heel Fatigue Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Heel Impact Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
 |
Ross Flex Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |
