Constant Acceleration Tester
WHAT IS CONSTANT ACCELERATION TEST?
Centrifugal constant acceleration testis performed to evaluate when components, equipment, and other electrical and electronic products are subjected to a steady acceleration environment (except gravity) such as occurs in moving vehicles, especially flying vehicles, rotating parts, and projectiles, whether the structure adaptability and integrity are good, and obtain the units' electrical parameters.
The acceleration test equipmentwe provide can be used for avionics and military hardware testing, satellite component testing, R&D laboratory and system identification testing, product development, reliability, stress screening, etc.
Constant Acceleration TesterCME Offers
CME is a professional constant accelerationtester manufacturer since 2006.
KRD30 Constant Acceleration Tester (Box Type)
KRD31 Constant Acceleration Tester (Arm Type)
KRD32 Non-standard Constant Acceleration Tester
WHAT IS THE PURPOSE OF DOING CONSTANT ACCELERATION TEST?
01
It may be used as a high-stress test to determine the mechanical limits of the package
Internal metallization and lead system, die or substrate attachment, and other elements of the microelectronic device. By establishing proper stress levels, it may also be employed as an in-line 100 percent screen to detect and eliminate devices with lower than nominal mechanical strengths in any of the structural elements.
02
Constant acceleration test is performed for the purpose of determining the effects of acceleration stress on component parts
Semiconductor devices and microelectronic devices, have the ability to operate properly during exposure to acceleration stress such as would be experienced in aircraft, missiles, etc.
WHAT STANDARDS REQUIRE THE CONSTANT ACCELERATION TEST?
It is an accelerated test designed to indicate types of structural and mechanical weaknesses not necessarily detected in shock and vibration tests. Many standards specify the constant acceleration test procedure, especially the MIL standards
MIL-STD-810
MIL-STD-883
MIL-STD-202
MIL-STD-750
IEC 60068-2-7
Now the price of test equipment mechanicalis reasonable, if you have needs to buy mechanical test equipment, please contact us.
在线联系供应商
Other supplier products
 |
KRD300 MOMENT OF INERTIA MEASUREMENT SYSTEM | Mass Moment of Inertia (Moment of Inertia) is a measure of an object's resistance to change in rotation direction. Moment of Inertia has the same r... |
 |
WHAT IS SHOCK RESPONSE SPECTRUM? | The traditional shock test (also known as the classic shock test) mainly simulates the actual shock environment by the shock effect produced by a s... |
 |
KRD13 HIGH ENERGY SHOCK TEST SYSTEM | KRD13 series pneumatic high-energy shock test system is an automatic pneumatic lifting vertical pressure shock testing equipment. The high energy t... |
 |
KRD61 6-DOF Test Table | KRD61 series 6-DOF test table is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provid... |
 |
KRD100 Incline Impact Tester | KRD100 Incline Impact Tester KRD100series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined imp... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
