.

Custom Motorcycle Brake Caliper Parts

We have a variety of motorcycle brake caliper parts for your choice. Our motorbike brake calipers are designed into 4 types: 3 positions, 2 pistons, 1 piston, and opposed pistons. Also, we can design custom motorcycle caliper parts according to customers' special requests. Inquiry for wholesale motorcycle brake caliper price!

Motorcycle Brake Caliper Parts Technical Specifications
The piston cylinder number 2
The piston diameter 25
Thickness of brake lining 7
Brake disc thickness 3.5
Brake disc diameter 0 180,0 190,0 220
The pitch of loading 43,84,96
Loading hole specification 2xM8
Caliper feed hole specifications M10X1.25

Other Motorcycle Brake Accessories Parts You May Be Interested
Motorcycle brake cylinder : motorcycle front brake master cylinder, motorcycle rear brake master cylinder
Custom motorcycle brake discs: 190mm motor disc brake, 220mm disc brake motor, 260mm disk brake motor and custom designs
Custom motorcycle clutch and brake levers: Motorcycle brake levers come in various types, each offering unique designs and features to suit different riding styles and preferences.

How To Rebuild Custom Motorcycle's Brake Caliper Parts
Rebuilding custom motorcycle brake calipers parts involves disassembling, inspecting, cleaning, and replacing worn-out parts. Here's a step-by-step guide to help you through the process:
Gather the necessary tools and parts:
Socket and wrench set
Brake cleaner
New seals and O-rings
Brake fluid
Remove the caliper:
Loosen the caliper mounting bolts
Slide the caliper off the rotor and secure it in a vice
Disassemble the caliper:
Remove the brake pads and retaining pins
Take out the caliper piston and inspect it for wear or damage
Clean all components with brake cleaner
Replace worn parts:
Replace any damaged seals, O-rings, or pistons
Ensure that all parts are properly lubricated with brake fluid
Reassemble the caliper:
Put the cleaned and replaced components back together
Install new brake pads and retaining pins
Tighten the caliper mounting bolts
Bleed the brake system:
Follow the manufacturer's instructions to bleed the brake system and remove any air bubbles

What Are The Different Types Of Custom Motorcycle Brake Caliper Parts?
There are several types of Custom motorcycle brake caliper parts available in the market. Here are the most common ones:
Floating calipers: These calipers have a single piston on one side, and the other side floats on guide pins. They are cost-effective and widely used in motorcycles.
Fixed calipers: These calipers have multiple pistons on both sides and are generally found on high-performance motorcycles. They provide better braking power and improved heat dissipation.
Radial calipers: These calipers have pistons arranged in a radial pattern. They offer increased rigidity and better brake modulation, making them popular in sport bikes.
Custom motorcycle brake caliper parts: Custom calipers are aftermarket options that offer unique designs, colors, and performance enhancements. They provide a personalized touch to a motorcycle's braking system.

How To Compress Custom Motorcycle Brake Caliper Parts?
Compressing custom motorcycle brake caliper Parts is a crucial step when reinstalling them after maintenance or brake pad replacement. Here's a simple procedure:
Prepare the caliper:
Make sure the caliper is clean and free of debris
Check the condition of the brake pads and replace if necessary
Compress the pistons:
Use a C-clamp or piston compression tool to gently push the pistons back into the caliper bore
Ensure the brake fluid reservoir cap is removed to allow fluid to return to the master cylinder
Check fluid level and bleed if required:
After compressing the caliper, inspect the brake fluid level in the reservoir and top up if needed
Bleed the brake system following the manufacturer's instructions if any air is present

Custom Motorcycle Brake Caliper Parts FAQs
Are brake calipers Universal?
Motorcycle brake caliper parts are not universal. Based on different car and wheel specifications, there are custom motorcycle brake calipers for your demand. For more information, you can inquiry our technology team about universal motorcycle brake caliper.

Which motorcycle brake caliper system is the best?
There are two kinds of motorcycle brake caliper system, one is the hydraulic disc brake caliper brake motor, the other is the stock brake motor caliper. Hydraulic disc brakes are more sensitive, more difficult to control, the stock kill better control, the problem is that if the stock brakes are old and not replaced with water in the rainy days will increase the brake sensitivity is easy to drag the motor brake caliper is very dangerous

Are front and rear bike brake calipers the same for motocycle?

How long should my motorcycle brake calipers last?
If you look after the brake caliper parts for motorcycles, you should just rebuild them based on the recommended service intervals – every two years in the case of this brake calipers motorcycle!

How do I know when my motorcycle brake calipers needs servicing/replacing?
You can check the motorcycle calipers by getting the wheel off the ground then turning the wheel, feeling and listening for drag. Try applying the caliper for motorcycle, then let go and see if the wheel frees up again; if they don’t come off cleanly, you’ll probably need to put some work in.

For more information about motorcycle clutch master cylinder, please feel free to contact us!



在线联系供应商

至: WUXI JINPO VEHICLE CO.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Motorcycle Master Cylinder
Motorcycle Master Cylinder Motorcycle Master Cylinder About motorcycle brake cylinderwe all supply, include caliper, master cylinder on motorcycle, brake lever, brake disc, ...
E Bike Disc Brakes
E Bike Disc Brakes CNC machining equipment to make sure the electric bike with hydraulic brakessuit all kinds of electric bikes. Professional production equipment to ...
Bike Disc Brake Rotor
Bike Disc Brake Rotor Cycle disc brake rotor bicycleis of brushed stainless steel surface treatment. Bicycle brake rotors is of stronger friction.410 stainless steel, th...
Electric Bicycle Master Cylinder
Electric Bicycle Master Cylinder Accessories electric car modification brake clutch anti-fall horns hand, Factory direct Electric bicycle Double-sided turn signal. we have 5 produc...
Motorcycle Brake Parts Accessories Supplier
Motorcycle Brake Parts Accessories Supplier We are leading motorcycle brake supplier for different types of motorcycle rear brake parts. About motorcycle brake system we all supply, including...
供应产品

Same products

2025中亚五国乌兹别克斯坦动力设备及发电机组博览会乌兹别克斯坦动力设备及发电机组博览会
2025中亚五国乌兹别克斯坦动力设备及发电机组博览会乌兹别克斯坦动力设备及发电机组博览会 卖方: 北京拓威展览 预定展位:参展单位在收到招展文件确定参展后,请认真填写“参展申请表”,盖章后扫描。报名一周内将展位及人员费用汇至我司帐户。我司按照付款的先后顺序予以确认。 2、确定展位...
定制金属模具
定制金属模具 卖方: 846123 高精度工程我们的定制金属模具采用最先进的技术和设备制造,以确保卓越的精度和准确性。每一个模具都是按照精确的规格设计的,考虑到了精密的公差和对你的部件的良好配合。这种精度减少了浪费,最大限度地减少...
Diesel Control Valve F 00V C01 507
Diesel Control Valve F 00V C01 507 卖方: China lutong Diesel Control Valve F 00V C01 507 Diesel Control Valve F 00V C01 514Chris Diesel Fuel Injector ...
3 in 1 Out HDMI Multi Display Auto Switcher with 0.4M HDMI Cable
3 in 1 Out HDMI Multi Display Auto Switcher with 0.4M HDMI Cable 卖方: 深圳市维客修科技有限公司 Description 3 in 1 out HDMI Multi Display Auto Switch Box Splitter 1080P HD TV Adapter Cab...
Armored Door Locks
Armored Door Locks 卖方: Wuyi Jiamin Locks Co., Ltd JM-55 Door handles Entrance 1, Material: Iron plate+ aluminum lever2, Center distance: 68mm3, P...