Automotive Fuel System Parts
Automobile fuel supply systemis classified according to fuel supply mode: carburetor engine, EFI engine and in cylinder direct injection engine, supply to the cylinders, and make it ignite, burn and expand to do work near the end of compression. Finally, the fuel supply system should also discharge the combustion product exhaust gas into the air. Each part must work flawlessly to achieve expected vehicle performance and reliability.
Car fuel supply systemhas been widely used in automobiles because of its simple structure, convenient use and low cost. However, the main disadvantage of carburetor engine is that the inflation and mixture distribution are not ideal. It has a certain adverse impact on the improvement of engine power, economy and emission. Therefore, modern cars are basically not used. At present, the mainstream is EFI engine and in cylinder direct injection engine.
EFI engine uses electronic control device to control the fuel supply process of the engine. According to the number of injectors, EFI engine can be divided into multi-point injection and single point injection. At present, multi-point injection is mostly used. The main principle of multipoint EFI is that the injection process of gasoline fuel is in the intake manifold. If the injector is installed on the intake pipe of each cylinder, gasoline can be injected into multiple cylinders, which forms multipoint injection. The cost of gasoline injection is not only lower, but also less carbon deposition.
How Does The Automotive Fuel System PartsWork?
The fuel pump sucks the fuel out of the fuel tank, filters out the impurities through the fuel filters and enters the low-pressure fuel chamber of the fuel injection pump. After increasing the fuel pressure, fuel will be transmitted to the fuel injector through the high-pressure fuel pipe. When the fuel pressure reaches a certain value, the fuel injector sprays the fuel into the combustion chamber in the form of mist to form mixed gas and burn. After working, the waste gas will be discharged into the atmosphere through the exhaust device.
The task of fuel supply system is to prepare a certain amount and concentration of combustible mixture according to the requirements of various working conditions of the fuel engine, supply it to the cylinder, and make it ignite, burn and expand to do work near the end of compression. Finally, the supply system should also discharge the combustion product - exhaust gas into the atmosphere.
How To Wire Automobile Fuel SystemParts?
Components of automotive fuel supply system consist of fuel tank, fuel pipe, fuel pump, fuel filter, air filter, fuel pressure regulator, fuel injector, intake manifold, exhaust manifold, etc.
The task of the fuel supply system of fuel engine is to pump the fuel out of the fuel tank through the fuel pump, via fuel filter which filters the impurities and water in the fuel, then enters the fabricated fuel rail. The engine ECU sends fuel injection signals to the fuel injection nozzle according to the output signals of various sensors of the engine, ejects the fuel from the fuel injectors at a certain pressure, mixes it with the clean air obtained through the air filter in the intake manifold in a certain proportion according to the requirements of various working conditions of the engine, finally enters the cylinder, compresses, works and exhausts in the cylinder, to generate engine power.
As one of the most professional car spares suppliers, we provide industry auto parts, auto spares sale, etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Windshield Wiper Blades | Because of legal requirements, almost everywhere cars must be equipped with windshield wiper cutters. The windshield wiper cutter also has the char... |
 |
Oil Level Sensors | The oil sensor level is used to accurately measure the oil level, oil temperature and engine oil state, is installed in the oil pan of the engine. ... |
 |
Ignition Coils | Introduction of car ignition coil Winding and potting are the key processes in the production of ignition coils. MAPMS has multiple automatic wi... |
 |
Car Engine Oil Filters | Under normal circumstances, the operation of engine parts will produce metal debris, incoming dust, carbon deposits oxidized at high temperatures, ... |
 |
Oil Pressure Sensors | Automotive Oil Pressure Sensor is an important device to detect the oil pressure of a vehicle engines. The detected data helps to control engine's ... |
Same products
 |
WATSILA L20 油嘴 柱塞 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，供应WARTSILA L20船用柴油机配件。 主要配件:油嘴，柱塞，出油阀，缸盖，缸套，连杆，活塞，活塞环，连杆螺栓，轴瓦进气阀，排气阀，阀座，指示阀，油管，喷油器，高... |
 |
MAN 16/24, 21/31,23/30船用柴油机配件 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，专业为客户提供原厂及OEM厂生产的高速、中速、低速船用柴油机设备及备件，图纸器、空压机、分机、油泵、水泵、水泵、仪器仪表等 主要品牌：MAN 、PIELSTICK DA... |
 |
High Voltage PTC Heater for Electric Vehicle | 卖方: Shanghai Pake Thermistor Ceramics Co., Ltd. | Application:It is used to heating the airCharacteristic description :High heating speedDual heati... |
 |
Solid Tire For Mini Wheel Loader | 卖方: Zhejiang Tongchao Industry and Trade Co., Ltd. | Solid Tire For Mini Wheel Loader（） It is composed of low heating and cutting-resistant materials... |
 |
RFG009 One-Piece forged barrel Series | 卖方: Taizhou Dishun Trading Co., Ltd. | We have internationally advanced wheel rim production equipment, large-scale spraying productio... |
