Disc Brake low floor Front Steering Axle
Disc Brake low floor Front Steering Axle
Model CH75FL
Nominal Load(Kg) 7500
Wheel Tread(mm) 2101
Kingpin Inclination(°) 8°
Caster Angle(°) 3.5°
Kingpin Camber(°) 0°
Kingpin Distance(mm) 1813
Tie-in(mm) -2~2
Max.Turning Angle(°) Inner 55°/Outer40.5°
Disc Brake Spec. 22.5"
Axle Weight(Kg) 500
Matching Model 12~25M Bus
CH75FL Performance Features
1.Designed for Low Floor Bus, One-Step-On Convenience.
2.Long Service Life, Low Weight, Economic Fuel Consumption.
3.Tapered Roller Bearings Adopted, thus Load Capacity Increased, Steering Force Reduced.
4.Bigger Inner Steering Angle, Excellent Maneuverability.
5.Adjustable Tie Rod, flexible Toe-In available, Service Life of Tire prolonged.
6.Bigger Tread suitable for 2.3-2.6m-width Bus.
7.Reasonable King Pin Incidence improved Steering Stabilization.
8.Optimized Outer Camber prolonged Service Life of Tire.
9.Most domestic Suspension Structures matchable.
10.Both domestic and abroad Disc Brakes optional.
11.Standard ABS enhanced Vehicle Stabilization and Controllability.
Other supplier products
|
|
Drop Center Rear Axle |
Drop Center Rear Axle
Model CH132
Nominal Load(Kg) 13000
Wheel Tread(mm) 1840
Max. Troque Output (N.m) 50000
Housing Spec.(mm*mm) 170*140
Ra... |
|
|
Drum/Disc Brake Rear Axle |
Drum/Disc Brake Rear Axle
Model CH13HB
Nominal Load(Kg) 11000
Wheel Tread(mm) 1860
Max. Troque Output (N.m) 30000
Housing Spec.(mm*mm) 158*15... |
|
|
Disc Brake Tagging Axle |
Disc Brake Tagging Axle
Model CH75FT
Nominal Load(Kg) 7500
Wheel Tread(mm) 2101
Kingpin Inclination（°） 8°
Caster Angle（°） 3.... |
|
|
T9S5 S&T Transmission |
Model T9S5
Max. Input Torque (kgf. m/rpm) 90/1200
Gear Ratio 1st 7.076
2nd 4.777
3rd 2.640
4 th 1.575
5th 1.000
rev 6.72
Synchro Type ... |
|
|
Drum/Disc Brake Front Steering Axle |
Drum/Disc Brake Front Steering Axle
Model CH55F
Nominal Load(Kg) 5500
Wheel Tread(mm) 2020(Drum)2050(Disc)
Kingpin Inclination（°） 7&de... |
供应产品
Same products
