Prototype Mould
Soft Prototype Mold
Prototype moldis a kind of test mould before mass production mould, customer make test mould for design verification, Product structure, part function analysis or produce small lot parts for other...
As a tool supplier whose goal is becoming an expert in the industry, HanKing Mouldhas experience in handling many different types of mould, including but not limited to prototype molds.
Prototype mold makingis a kind of test mould before mass production mould, customer makes test mould for design verification, product structure, part function analysis or produces small lot parts for other process verification. Prototype moulds are usually different from production moulds as they are not usually intended to be used for long periods of time.
Prototype molds are also called soft moulds or fast moulds, thus the cost of prototype molds are less than serious plastic moulds, when our designer is constructing a prototype mould, the first point he should learn is the purpose of customer to make this prototype mold.
Some customers' goal is to manufacture low-cost pre-production molds that are tested and troubleshooting prior to final serious production to obtain more engineering data.
Some customers have reduced the overall product development cost of manufacturing low-cost prototype molds simply because of the low production of parts in demand.
Some clients are purposed to get fast samples or small batch quantities, for another process testing, such as electrical engineering testing, painting test, etc..
If you are not sure if the final parts are functional ok and how to build a production mould, as a professional prototype mold maker in China we will give you professional suggestion that which mold design is high efficiency and low cost, and also HanKing provide very short lead time to save your time of product develop process.
If you want to know more about how to make a plastic mold prototype, please visit our website.
As one of chinese plastic molding manufacturers, we can offer types of related products for sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
Double Shot Plastic Injection Mold Products | Double Shot Plastic Injection Mold Products Part function: Jug Cap Part material: PP & POE Cavity: 2+2 cavities Cavity steel: ASSAB 8418 Li... |
 |
3 Plate Mould 49113-21. | Mould Name: 3 Plate Insert Mould/ 3 plate injection mold Part Material: PBT GF15 Product Size: ф34.9x82.29 Product Description: Mischschraube kpl... |
 |
Home Appliance Molding Parts | Household Appliances Mould Parts High Gloss Plastic Finish Parts High gloss polish finishing plastic injection molded parts The part is thin and ... |
 |
Plastic Injection Moulds | At present, more than 90% of plastic products in our daily life are injection molded. The market prospect, capacity, and application are large and ... |
 |
Custom Injection Mold Making Services for Auto Parts | Custom Injection Mould Making Servicesfor Auto Parts Mould Type: Automotive Final Sensor Production Material: 33% glass fiber reinforced, black PA... |
Same products
 |
Armored Door Locks | 卖方: Wuyi Jiamin Locks Co., Ltd | JM-55 Door handles Entrance 1, Material: Iron plate+ aluminum lever2, Center distance: 68mm3, P... |
 |
WATSILA L20 油嘴 柱塞 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，供应WARTSILA L20船用柴油机配件。 主要配件:油嘴，柱塞，出油阀，缸盖，缸套，连杆，活塞，活塞环，连杆螺栓，轴瓦进气阀，排气阀，阀座，指示阀，油管，喷油器，高... |
 |
MAN 16/24, 21/31,23/30船用柴油机配件 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，专业为客户提供原厂及OEM厂生产的高速、中速、低速船用柴油机设备及备件，图纸器、空压机、分机、油泵、水泵、水泵、仪器仪表等 主要品牌：MAN 、PIELSTICK DA... |
 |
High Voltage PTC Heater for Electric Vehicle | 卖方: Shanghai Pake Thermistor Ceramics Co., Ltd. | Application:It is used to heating the airCharacteristic description :High heating speedDual heati... |
 |
Solid Tire For Mini Wheel Loader | 卖方: Zhejiang Tongchao Industry and Trade Co., Ltd. | Solid Tire For Mini Wheel Loader（） It is composed of low heating and cutting-resistant materials... |
