FZB Function-type wind power used prefabricated substation
The substation is to manufacture and assemble the support equipments for wind-power step-up stations in advance, i.e. install step-up transformer, HV switch, LV switch, supply transformer and other auxiliary devices in an common enclosure and pass the series type test. The substation is designed according to the specificity of wind-power, which is applicable for severe environmental conditions. The product has passed the type tests in China national testing institute, and the feature of the product is qualified with the requirement of wind-power plant.
Other supplier products
|
|
35kV 40.5kV 145kV 252kV outdoor type high voltage circuit breaker with motor spring mecanism |
SF6 high-voltage AC circuit breaker is of 3-phase 50Hz high-voltage switchgear,used for the control and protection of power distribution and transm... |
|
|
66-550kv YJLW02 longitudinal water-proof XLPE power cable |
1 Standard 1) Conductive core(800mm2 and the below is tightening circle, the above is cutting structure) 2) The shielding layer of the conduct... |
|
|
72.5kV 145kV 252kV 550kV SF6 Gas Insulated High Voltage Switchgear(GIS) |
GIS is a gas-insulated metal-enclosed switchgear made by Taikai, digesting and absorbing GIS product of high-voltage technology from home and abroa... |
|
|
GW6A-126/145/170/252/363/550 Series, single column, double arms, vertically shrinkable type, HV, AC disconnector |
GW6A outdoor three-phase high-voltage AC disconnector, rated frequency 50Hz, rated voltage 126k-252kV, is applicable for the switch operation under... |
|
|
40.5kV 72.5kV 145kV gas insulated Plug And Switch System COMPASS |
ZCW-126/T2000-40 COMPASS, adopting air as arc insulating medium and SF6 gas as the arc control medium, is to be used for the control and protection... |
供应产品
Same products
