.

SAE EV Charging Socket

Mechanical Properties

Contact Pin: Copper alloy, silver or nickel plating

Sealing gasket: rubber or silicon rubber

Mechanical life: no-load plug>10000times

Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure

Insertion and extraction force:<100N

Electrical Performance

Rated current: 16A/32A/40A/50A

Rated voltage: 240V

Insulation resistance: >1000MΩ(DC500V)

Pins temperature:<50K

Withstand voltage: 2500V

Contact impedance: 0.5mΩMax

Environmental performance

Temperature: -30℃~+50℃

SAE EV Charging Socket Features

Conform to the provisions and requirements of SAE ev j1772/ ev plug j1772-2012, It can applicable to all American standard electric vehicle charging guns.

Use copper alloy, silver plated surface Beautiful appearance,prevention cap can be installed on the left side, the right side or the front of it, plug conveniently.

XLPO for cable insulation prolonging the aging resistance life-span. TPU sheath improves the bending life and wear resistance of cable. The best material in the market at present.

Special internal waterproof protection performance, protection grade achieved IP55 (working condition). The shell can effectively insulate water from body and enhance the safety level even in bad weather or special circumstances.

Reliable material, flame retardant, pressure resistance, abrasion resistance, impact resistance and high oil resistance.

Application of SAE EV Charging Socket

Apply to Vehicle

For Tesla model3, for Tesla Model S, for Tesla Model X, for BAIC EU-Series, for BYD Yuan/S2 EV, for BYD e5, for Chevrolet Volt, for Mia, for Mia Electric Van, for Mitsubishi OUTLANDER PHEV, for Nissan NV200 SE Van, for Nissan leaf, for SAIC Baojun E-Series, for SAIC Roewe Ei5 EV, for BMW 530e/Le, for Renault Zoe, for Hyundai Kona EV, for BMW i3, for BYD Tang PHEV, for Chery eQ EV, for Toyota Prius PHEV, for Volkswagen e-Golf, for Geely Emgrand EV, for Great Wall Ora R1 EV

Application in area

Commercial EV Charging/Workplace EV Charging, Hotels EV Charging, Home/Residential EV Charging, Public EV charging

SAE EV Charging Socket Parameter

AG ELECTRICAL EV Charging sockets acquires all safety and production certificates in electrical filed, ISO9001, ISO 14001, OHSAS 18001, sae j1772 plug/ j1772 socket

As one of the most reliable ev charging companies, we provide electric vehicle charging, sae j1772 socket, j1772 outlet, sae j1772 connector, ev socket, electric car charging socketsand etc. Contact us to know electric vehicle charging cable typesor more.


在线联系供应商

至: AG Electrical
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

SAE EV Charging Socket
SAE EV Charging Socket Mechanical Properties Contact Pin: Copper alloy, silver or nickel plating Sealing gasket: rubber or silicon rubber Mechanical life: no-load plug&...
SAE EV Charging Adapter TYPE 1 to GB/T
SAE EV Charging Adapter TYPE 1 to GB/T Ev adapters Temperature: The temperature for our ev adapters is -30℃~+50℃. Packaging Details: TYPE1 ev chargerfor charging American EV car...
SAE EV Charging Socket
SAE EV Charging Socket Mechanical Properties Contact Pin: Copper alloy, silver or nickel plating Sealing gasket: rubber or silicon rubber Mechanical life: no-load ...
SAE J1772 EV Charging
SAE J1772 EV Charging "American Standard" refers to the SAE J1772 standard. SAEJ1772is just a general term. It includes four subdivision standards and three different ch...
EV Charging Adapter TYPE1 TO GBT
EV Charging Adapter TYPE1 TO GBT Temperature: -30℃~+50℃ Packaging Details: Type 1 electric car chargerfor charging American EV cars from EV charger with European standard, 2pc...
供应产品

Same products

Radio frequency signal generator
Radio frequency signal generator 卖方: 00000 Radio frequency signal generator Radio frequency signal generator Overview Adopting DD...
真空泵三相异步电机
真空泵三相异步电机 卖方: Taizhou Sulin Electromechanical Co., Ltd. 真空泵三相异步电机是一种专为真空泵设计的专用电机,具有高效可靠的特点。该电机是各种工业应用中的关键部件,尤其是在真空技术至关重要的领域。其坚固耐用的设计和卓越的性能使其成为需要持续高效产生真空的...
BLIIOT BL193 SNMP 边缘 I/O 模块
BLIIOT BL193 SNMP 边缘 I/O 模块 卖方: 深圳市钡铼技术有限公司 BL193是一款IOy系列工业级多功能可编程SNMP远程I/O模块。它采用电气隔离技术,通过了EMC/EMI测试和-45至80°C高低温验证,并内置独立的硬件看门狗,以确保在恶劣环境下长...
BLIIOT BL191 OPC UA Edge I/O 模块
BLIIOT BL191 OPC UA Edge I/O 模块 卖方: 深圳市钡铼技术有限公司 BL191是一款IOy系列工业级多功能可编程OPC UA远程I/O模块。它采用电气隔离技术,通过了EMC/EMI测试和-45至80℃高低温验证,并内置独立的硬件看门狗,以确保在恶劣环境下长期稳定...
SDR for IoT Applications
SDR for IoT Applications 卖方: BEIJING HIGHMESH INFORMATION TECHNOLOGY CO.,LTD. SDR for IoT Applications SDR for IoT Applications: Highmesh's Flexible and Scalable Solution...