SPD for Windpower System
Wind power protection devices are mainly used to protect wind power system equipment, sensitive electric and electronic parts in turbine system from lightning strikes, widely applied in power line protection in wind power system's distribution box, and other AC distribution box.
Feature of Wind Protection Devices
1. Own designed temperature control circuit-breaking technology and built-in overcurrent protection circuit to completely avoid fire danger.
2. Working state and failure state are clear and intuitive.
3. Kevin wiring is workable.
4. Convenient installation and simple maintenance.
5. Remote alarm Status indicator
6. Exquisite workmanship, can work in hostile environments such as acid, alkali, dust, salt spray, and humidity for a long time.
Application of Wind Protection Devices
Applied to wind power protection system, Wind power generator.
Low voltage transformer box, Output of second power equipment, US and European box are applicable.
Technical Parameters of Wind Protection Devices
Model M40W-690 M40W-400 M40W-230
Lightning protection zone(LPZ) 1-2
Standards Compliance IEC61643-11, EN60950
Classification Class C/Type 2
Nominal working voltage Un 690V 400V 230V
Max continuous operating voltage Uc 700V 440V 250V
Nominal discharge current (8/20µs) In 20KA
Max discharge current Imax (8/20µs) Imax 40KA
Follow current interrupt rating Ifi 25KArms/100Arms
Short-Circuit Current Rating Isccr 25KA
Temporary overvoltage (TOV)(L-N) Ut 440 V / 120 min. – withstand
Temporary overvoltage (TOV) [N-PE) Ut 1200 V / 200 ms – withstand
Protection level Up 3000V 2200V 1500V
Response time tA (L-N/N-PE) 25ns
Protection model L L L N-PE L L L-PE L N-PE
Dimension 90 (H)×90(W)×65(L)mm 90 (H)×54(W)×65(L)mm 90 (H)×36(W)×65(L)mm
Mounting DIN-rail Mounting 35mm
IP code IP20
Working conditions Temperature: -40 to 80℃, Relative humidity: ≤95％
Shenzhen Techwin Lighting Technologies Co., Ltd is a professional spd supplier, we provide solar power surge protector, lightning surge protector, signal surge protector and etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
RJ45 SPD 10/100/1000Mbps network signal surge arrester ethernet surge protection device | Data line protectorseries are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the im... |
 |
SPD for Network / Data Line Surge Protector | Data line surge protectorseries are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from ... |
 |
Din-rail DC Power SPD For PV Solar Power System | DC module for PV solar power system is mainly used to protect DC power system and electric and electronic equipment from lightning over-voltage and... |
 |
UL 1449 Certificated TVSS Lightning Protection Box | ul 1449 tvss surge protector ul 1449 tvss ul certified surge protector ul surge protector ul approved surge protector ul 1449 surge protector, ul c... |
 |
SPD for Ethernet Power System | The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance... |
Same products
 |
Radio frequency signal generator | 卖方: 00000 | Radio frequency signal generator Radio frequency signal generator Overview Adopting DD... |
 |
真空泵三相异步电机 | 卖方: Taizhou Sulin Electromechanical Co., Ltd. | 真空泵三相异步电机是一种专为真空泵设计的专用电机，具有高效可靠的特点。该电机是各种工业应用中的关键部件，尤其是在真空技术至关重要的领域。其坚固耐用的设计和卓越的性能使其成为需要持续高效产生真空的... |
 |
BLIIOT BL193 SNMP 边缘 I/O 模块 | 卖方: 深圳市钡铼技术有限公司 | BL193是一款IOy系列工业级多功能可编程SNMP远程I/O模块。它采用电气隔离技术，通过了EMC/EMI测试和-45至80°C高低温验证，并内置独立的硬件看门狗，以确保在恶劣环境下长... |
 |
BLIIOT BL191 OPC UA Edge I/O 模块 | 卖方: 深圳市钡铼技术有限公司 | BL191是一款IOy系列工业级多功能可编程OPC UA远程I/O模块。它采用电气隔离技术，通过了EMC/EMI测试和-45至80℃高低温验证，并内置独立的硬件看门狗，以确保在恶劣环境下长期稳定... |
 |
SDR for IoT Applications | 卖方: BEIJING HIGHMESH INFORMATION TECHNOLOGY CO.,LTD. | SDR for IoT Applications SDR for IoT Applications: Highmesh's Flexible and Scalable Solution... |
