NEMA 23 ROUND STEPPER MOTOR
NEMA 23 ROUND STEPPER MOTOR QUALITY
Unlike the nema 23 size motor, the NEMA23 round stepper motor driveris round one, and the size is 56.4*56.4.
NEMA 23 ROUND STEPPER MOTOR CHARACTERISTIC PARAMETER
|
STEP ANGLE |
|
|
2 |
|
|
RATED VOLTAGE |
|
|
RATED CURRENT |
|
|
RESISTANCE |
|
|
INDUCTANCE |
|
|
HOLDING TORQUE |
|
|
RUNNING TORQUE(AT --PPS) |
--V.DC, --A/PHASE |
|
DIELECTRIC STRENGTH |
500V A.C/MIN. |
|
INSULATION RESISTANCE |
100MΩ+/MIN. |
|
INSULATION CLASS |
CLASS B |
|
TEMPERATURE RISE |
80K MAX. |
|
ROTOR INERTIA |
70 g.cm²(0.39 oz.in²) |
|
WEIGHT |
|
|
ALLOWABLE THRUST LOAD |
15N |
|
ALLOWABLE RADIAL LOAD |
75N(ON THE SHAFT END) |
|
OPERATION AMBIENT TEMP. |
‘-20℃---+50℃ |
|
OPERATION AMBIENT HUM. |
15%----90% |
|
LIFE |
5000HOURS |
NEMA 23 ROUND STEPPER MOTOR TORQUE CURVE
SPEED VS TORQUE CURVE
MODEL: HEM-23S1601
|
VOLTAGE |
○ |
SUPPLY |
WINDING |
||
|
CURRENT |
○ |
PEAK |
AVE |
||
|
EXCITATION |
Full step |
||||
|
DRIVE CIRCUIT |
HDSD2A8 |
UNIPOLAR |
# |
BIPOLAR |
|
|
INERTIA LOAD |
10g-cm2 |
LOT NO.: 060919
If you want to know more about nema 23 motor dimensions, please visit our website.
在线联系供应商
Other supplier products
 |
LEAD SCREW MOTOR & LINEAR SLIDES | Lead screw stepper motorare also known as linear slide motor, which produces a linear force along its length. This featured through type lead screw... |
 |
NEMA 23 LEAD SCREW MOTOR | NEMA 23 Linear Actuator ACME lead screw with high precision, and the lead screw resolution is ±0.017mm. High-density plastic nuts and th... |
 |
NEMA 23D SQUARE STEPPER MOTOR | NEMA23 Motor Controller size 23 stepper motorsis a standard hybrid stepper motor, the step angle is 1.8°. NEMA 23CURRENTSQUARE STEPPER MOTO... |
 |
NEMA 34 STEPPER MOTOR | China NEMA 34 stepper motoris a standard hybrid stepper motor, with a step angle is 1.8°. NEMA 34 SQUARE STEPPER MOTOR BODY SIZE NEMA 34 ... |
 |
NEMA 8 STEPPER MOTOR | NEMA 8 stepperis a compact size hybrid motor, which is mainly applied to small precision instruments. HEMM's new nema 8 series products have hi... |
