Rear Hub Motor or Front Hub Motor
Electric bicycles are becoming more and more popular. However, their most striking thing is to provide two-wheeled electric vehicles for leisure riding and commuting. The two most popular motor system designs recently used for electric bicycles are mid-drive motors and hub motors.
In-wheel motors are the most commonly used motor type before mid-drive motors. In the hub motor, the electric motor is placed in the center of the bicycle wheel to achieve even load distribution. Surely, the in-wheel motor can be installed on the rear wheel or the front wheel.
- electric front hubmotor
The front hub motor can perfectly balance the weight of the electric bicycle, because more weight is usually concentrated on the rear wheel. In addition, the front wheels usually get less level ground than the rear wheels. This is because they often lift up road debris and prepare for the rear wheels. Usually, the front wheel hub motor will leave the rear wheel intact, so that tires and inner tubes can be replaced more conveniently.
The lighter the front wheel of an electric bicycle, the lower the traction. Therefore, the more best rear hub motormay usually burn out due to continuous pedaling. The front fork is not as strong as the rear fork. This means that a powerful front hub motor will eventually damage the front fork over time. In addition, a powerful hub motor of 750W and above is usually best installed in the rear wheel of an electric bicycle.
There are many hub motor manufacturers in china, but we are one of the best choices for you. Contact us to buy china hub motor.
在线联系供应商
Other supplier products
 |
CMT03P Ebike Mid Motor | Shengyi powerful CMT-03P motor is strong enough to ride on rough mountain trail, which offers stable, smooth and continuous power to support 120NM ... |
 |
CMT03P Ebike Mid Motor | Shengyi powerful CMT-03P motor is strong enough to ride on rough mountain trail, which offers stable, smooth and continuous power to support 120NM ... |
 |
DGW25P-Rear Drive Motor-MTB | This motor is the most powerful one in our company, wheel size 20in~28in, rated power 750W~1000w. Main parameter of DGW25P-Rear Drive Motor-MTB ... |
 |
CMT03 Ebike Mid Motor | The structure of the mid motoris much more complicated than hub motor. Mid motor also requires clutches, drive shafts, and other components. The po... |
 |
Ebike Mid Motor | Mid motor is mounted on the frame where the pedal crank is. Mid motor are far more complex than hub motors, which also cost too much. The major adv... |
