AB Fan 20-PP01080
Technical Specifications for AB Analog IO Module 1746-NI8
Brand Allen-Bradley
Part Number/Catalog No. 1746-NI8
Series SLC 500
Module Type Analog I/O Module
Backplane Current (5 Volts) 200 milliamps
Inputs 1746-NI4
Backplane Current (24 Volts DC) 100 milliamps
Input signal Category -20 to +20 mA (or) -10 to +10V dc
Bandwidth 1-75 Hertz
Input Filter Frequencies 1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz, 50 Hz, 75 Hz
Update Time 6 milliseconds
Chassis location Any I/O module slot except slot 0
Resolution 16 bits
Backplane Current (5 Volts) 200 mA;(24 Volts DC) 100 mA
Step Response 0.75-730 milliseconds
Conversion type Successive approximation, switched capacitor
Applications Combination 120 Volts AC I/O
Input Types, Voltage 10V dc 1-5V dc 0-5V dc 0-10V dc
Backplane Power Consumption 14 Watts Maximum
Input Type, Current 0-20 mA 4-20 mA 20 mA 0-1 mA
Input Impedance 250 Ohms
Data Format Engineering Units Scaled for PID Proportional Counts (-32,768 to +32,767 range), Proportional Counts (User Defined Range, Class 3 only). 1746-NI4 Data Form
Cable 1492-ACABLE*C
LED Indicators 9 green status indicators one for each of 8 channels and one for module status
Thermal Dissipation 3.4 Watts
Wire Size 14 AWG
UPC
UNSPSC 32151705
About 1746-NI8
The Allen-Bradley 1746-NI8 is an analog single-slot I/O module for the SLC 500 system. It is a high-resolution analog input module that is configurable with RSLogix 500 programming software. It is suitable for time-sensitive applications that require fast analog signal conversion and high accuracy. The 1746-NI8 module has an 8-Channel input with an isolated backplane. Its backplane current consumption is 200mA and 100mA at 5 Volts DC and 24 Volts DC respectively. It has a maximum backplane power consumption of 1 Watt at 5 Volts DC and 2.4 Watts at 24 Volts DC. The 1746-NI8 can be installed in any I/O slot, except Slot 0 of the SLC 500 I/O chassis. Input signal data is converted to digital data via successive approximation conversion. The 1746-NI8 module uses programmable filter frequencies with a low-pass digital filter for input filtering. It performs continuous autocalibration and has an isolation voltage of 750 Volts DC and 530 Volts AC, tested for 60 seconds. It has a common-mode voltage ranging from -10 to 10 Volts with a maximum of 15 Volts between any two terminals.
The 1746-NI8 module comes with a removable terminal block of 18 positions. For wiring, the Belden 8761 or a similar cable must be used with one or two 14 AWG wires per terminal. The cable has a maximum loop impedance of 40 Ohms at the voltage source and 250 Ohms at the current source. For troubleshooting and diagnostics, it has 9 green LED status indicators. The 8 channels have one indicator each to display the input status and one each for displaying the module status. The 1746-NI8 has a Division 2 hazardous environment standard with an operating temperature of 0 to 60 degrees Celsius.
The 1746-NI8 features Eight (8) channel analog input module compatible for used with SLC 500 Fixed or modular hardware style controllers. This module from Allen-Bradley has individually selectable voltage or current input channels. Available selectable input signals include 10V dc, 1–5V dc, 0–5V dc, 0–10V dc for Voltage while 0–20 mA, 4–20 mA, +/-20 mA for Current.
Input signals may be represented as Engineering Units, Scaled-for-PID, Proportional Counts (–32,768 to +32,767 range), Proportional Counts with User Defined Range (Class 3 only) and 1746-NI4 Data.
This Eight (8) channel module is compatible for use with SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04 and SLC 5/05 processors. SLC 5/01 may only operate as class 1 while SLC 5/02, 5/03, 5/04 are configurable for Class 1 and Class 3 operation. The channels of each module may be wired in single-ended or differential input.
This module has a removable terminal block for connection to input signals and easy replacement of module without the need of rewiring. Selection of input signal type is done with the use of embedded DIP switches. DIP switch position must be in accordance to the software configuration. If the DIP switch settings and the software configuration differs, a module error will be encountered and will be reported in the diagnostic buffer of the processor.
The programming software that is used with the SLC 500 product family is RSLogix 500. It is a ladder logic programming software that is also used to configure majority of modules in the SLC 500 product family.
Viyork is a professional industrial automation products supplier, we provide industrial automation components, 20 pp01080, ac servo motor, power inverter and etc. Want to know more? Contact us.
Other supplier products
|
|
Temperature Controller |
According to the temperature variation of the working environment, physical deformation occurs in the temperature controller, which produces some s... |
|
|
Servo Drive |
Shenzhen Viyork Technology CO., LTD mainly engaged in all kind of industrial automation control productssuch as AC Servo Motor, Servo Drive, Servo ... |
|
|
AB IO Adapter Module 1747-ASB |
Technical Specifications for AB IO Adapter Module 1747-ASB Brand Allen-Bradley Series SLC 500 Part Number/Catalog No. 1747-ASB Module Type I/O Adap... |
|
|
AC Servo Motor |
Since the 1980s, With the development of integrated circuits, power electronics, AC variable speed drive technology, the permanent magnet AC servo ... |
|
|
Fanuc AC Servo Motor A06B-0373-B075 |
Specifications of Fanuc AC Servo Motor A06B0373B075
Brand
Fanuc
Type
AC Servo Motor
Model
A06B-0373-B07... |
供应产品
Same products
