.

Air Inlet Louver

Air Inlet Louver improve air flow into the cooling tower, prevent debris from entering, eliminate water splash-out (which can cause icing, near-site water damage, and costly water and water treatment chemical loss), restrict the amount of sunlight into the cooling tower (to impede algae growth), reduce noise from the tower, and improve the tower's appearance.

Feathers of our

Constructed entirely of CTI Standard 136 PVC, for its durability, weather-resistance, and self-extinguishing fire characteristics

Because of their cellular "baffle" design and black color, modules significantly block sunlight (70:1 light reduction) that promotes algae growth on the interior surfaces of the cooling tower system. This reduces the cost of algae-removal chemicals and labor and allows the tower to operate more efficiently.

The baffle design also reduces noise leaving the tower through the louver modules by ≈3 decibels.

Proprietary, engineered cellular baffling restricts splash-out, light, weather, and noise but still achieves very low pressure drop results.

Convenient, pre-assembled modules are 1 ft (305 mm) wide, 2.5 inches (63.5 mm) deep, and available in lengths from 1 ft (305 mm) to 10 ft (3050 mm).

Our products mainly include Cooling Tower Fill,  (such as Drift Eliminator, Mist Eliminator, Spray Nozzle etc.)  (such as Tube Settler, MBBR Media, Bio Ball Media, Diffusion Aerator etc.) More information please view:



在线联系供应商

至: Hebei Long Zhuo Trade Co.,Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Cooling Tower Filler Media-CF80016
Cooling Tower Filler Media-CF80016 -CF80016 introduction is one of the most important components for exchange of gas and water in cooling tower. is the major parts to improve the eff...
Cooling Tower PP Infill-CF950-SW
Cooling Tower PP Infill-CF950-SW -CF950-SW introduction is one of the most important components for exchange of gas and water in cooling tower. is the major parts to improve the ef...
Spray Nozzle
Spray Nozzle ABS spary nozzle for cooling towers The is an injection molded polypropylene unit consisting of two parts—the main body with integral target...
Drift Eliminator-3
Drift Eliminator-3 Drift Eliminator-3Width:145mmLength: as your requestThickness: from 0.28mm to 0.45mmProfile height: 30mmMaterial: Virgin PVC or PP
Cooling Tower Infill Media-CF1000-SP
Cooling Tower Infill Media-CF1000-SP -CF1000-SP introduction is one of the most important components for exchange of gas and water in cooling tower. is the major parts to improve the e...
供应产品

Same products

SL系列砂温调节器
SL系列砂温调节器 卖方: 青岛三铸机设备制造有限公司 本机布置于生产线中用于调节型砂温度,温度调节一般按降温,加温二种功能设计制造,热交换器采用新型螺旋翅片均匀布于钢管之上来实现型砂热交换,热电偶作为热敏元件控制砂温符合温度要求的型砂才可送至下道工...
S89系列水冷沸腾冷却床
S89系列水冷沸腾冷却床 卖方: 青岛三铸机设备制造有限公司 水冷式沸腾冷却床是目前消失模铸造砂处理系统中使用最多,应用范围最广的一种冷却设备。尽管它的结构复杂,能耗高、对型砂粒度要求严格,但由于它的冷却效果好,能够满足工艺技术要求,所以仍被作为砂冷却的首...
S86系列沸腾冷却床.
S86系列沸腾冷却床. 卖方: 青岛三铸机设备制造有限公司 该系列设备是一个连续的冷却器,松散的旧砂进入冷却床后,在高压风机强力鼓风的情况下,呈沸腾状态,并从进砂口开始绕蛇形冷却管曲流前行,在强力抽风和冷却水的作用下,旧砂得以充分冷却除膜。
S83系列双盘搅拌冷却机
S83系列双盘搅拌冷却机 卖方: 青岛三铸机设备制造有限公司 该机主要用于黏土砂旧砂的冷却,充分的运动使旧砂的温度,湿度、成分均匀,在冷却的同时完成预湿。该机结构紧凑,运动平稳、能耗低、冷却效果好。高压风机使旧砂处于沸腾状态,达到最佳冷却效果。卸料门开度可...
LG系列水冷式滚筒冷却床
LG系列水冷式滚筒冷却床 卖方: 青岛三铸机设备制造有限公司 水冷式滚筒冷却床是由滚筒,集砂罩、传动机构由电动机、减速器、三角胶带、齿轮组成。具备传动可靠,承载能力大、运行平稳、使用寿命长、结构紧凑、安装维护方便等结构特点。 水冷式滚筒冷却床利用型砂在输送...