KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM
KRD17 series is a new designed fully automatic pneumatic lifting bidirectional shock test system with high degree of automation, simple operation and convenient maintenance. It is a bidirectional vertical shock test system developed for measuring and determining the impact resistance of large specimens without turning over them, and assesses the functional reliability and structural integrity of the specimens. It is especially used in the field of battery testing, can perform various conventional classic vertical upward and downward shock tests in one test table to realize the shock wave and impact energy suffered by the product in the actual environment. This equipment meets standards of IEC68-2-27, MIL-STD-202, MIL-STD-750, MIL-STD-810, MIL-STD-883, UN38.3 and other battery testing standards.
FEATURES OF KRD17 BIDIRECTIONAL VERTICAL mechanical shock machine
Circulating storage cylinder: strong impact, fast speed, and low air consumption
Adopt full pneumatic drive: simple structure, high reliability, no pollution
Bidirectional shock test: effectively complete the upward and downward shock tests without turning over UUT
Multiple functions: to complete the bidirectional shock and bump tests by one clamping, with high efficiency
High degree of automation: After the height setting is completed, the software automatically lifts the working table to the set height, with high accuracy and good repeatability
Multi-track guide pillar: combined with pneumatic balance lifting system, no noise, fully automatic positioning table
Built-in pneumatic brake mechanism, safe and reliable
High-performance buffer and vibration isolation device, no special foundation is needed, and it is easy to install
TECHNICAL SPECIFICATIONS OF KRD17 BIDIRECTIONAL VERTICAL mechanical shock testSYSTEM
TABLE OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM
This bidirectional shock test table is composed of a circulating air storage cylinder, a pneumatic self-locking control mechanism up and down each, a forward impact plate, a reverse impact plate, a locking mechanism, a base, and other parts.
The circulating accumulator is used as the shock power cylinder. The pneumatic brake device locks the table at the set position. The circulating accumulator is inflated. After the air pressure reaches the set value, the locking device is controlled to release, and the circulating storage cylinder drives the table to accelerate upward and downward movement, and impacts the waveform generator on the impact plate to produce the required shock waveform.
Come and buy testing equipment.
DUAL MASS SHOCK AMPLIFIER OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM
The shock amplifier is a device that uses the rebound energy of the ordinary impact shock table to realize the opposite impact between the servo table and the seat on the amplifier so that the impact acceleration is multiplied.
DUAL MASS SHOCK AMPLIFIER OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM
WAVE GENERATORS OF KRD17 BIDIRECTIONAL VERTICAL SHOCK TEST SYSTEM
KRD17 series bidirectional shock test system is equipped with a half-sine wave generator. The half-sine wave generator is mainly made of engineering rubber (considering the stiffness and cohesive force of rubber) and felt pads of various thicknesses. Different thicknesses are connected in series to form multiple stiffnesses to achieve different shock pulse widths. Optional for post-peak sawtooth wave generator which is lead cone; trapezoidal wave generator air source is high-pressure nitrogen, the pressure range is 1-10MPa, and the overload value can be adjusted between 10-100g, as shown in the following figure:
在线联系供应商
Other supplier products
 |
KRD20 PNEUMATIC BUMP TEST MACHINE | KRD20 bump test machineis a fully automatic pneumatic lift vertical bump test system. It is applicable to measure and determine the bump resistance... |
 |
KRD61 6-DOF Test Table | KRD61 series 6 DOF testtable is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide... |
 |
KRD10 Hydraulic Vertical Shock Test System | KRD10series is a full-automatic hydraulic lifting vertical shock testing machine, with the state-of-the-art design, high degree of automation, simp... |
 |
KRD70 Hydraulic Vibration Shaker | KRD70 series hydraulic vibration shaker is an electronic hydraulic servo vibration test machine with the advantages of fast response speed, high an... |
 |
KRD100 Incline Impact Tester | KRD100series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined impacts or crushing forces due to... |
Same products
 |
Independent Air Suspension | 卖方: Shanghai Komman vehicle component systems stock co., ltd | Air suspension systemis generally divided into independent air suspension and nomal air suspensio... |
 |
D11 Motor Mount For Bosch Ebike Motor | 卖方: Shanghai Komman vehicle component systems stock co., ltd | Port: Shanghai, China Production Capacity: 20000T/Year Paymen... |
 |
Bus Air Suspension | 卖方: Shanghai Komman vehicle component systems stock co., ltd | What is air suspension bus Bus air ride suspensionis also called air bag suspension,the differen... |
 |
6-8m Bus Front Air Suspension System | 卖方: Shanghai Komman vehicle component systems stock co., ltd | 6-8m Bus Front Air SuspensionSystem Port: Shanghai, China Production Cap... |
 |
50 Cylinder Diameter Shock Absorber | 卖方: Shanghai Komman vehicle component systems stock co., ltd | Item name: Shock absorber Port: Shanghai, China Production Ca... |
