Dywer Series SBLT2 & SBLTX Level Transmitter
Welcome to purchase discount source dywer series sblt2 & sbltx level transmitter from our company, which is one of the best China dywer series sblt2 & sbltx level transmitter manufacturers and suppliers.Series SBLT2 & SBLTX Submersible Level TransmitterPerfect for Ground Water and Wells, Lightning Protected or Intrinsically SafeSBLT2 and SBLTX Submersible Level Transmitters are manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Bullet nose design protects the diaphragm from damage.The SBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The SBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.Product Applications• Well monitoring• Ground water monitoring• Environmental remediation• Surface water monitoring• Down hole• Hole• Water TanksFeatures• Excellent chemical compatibility• Lightning and surge protection on SBLT2 models• Maintenance free vent filter• UL approved intrinsically safe on SBLTX models• Slim design for tight applicationsSpecificationsService:Compatible liquids.Wetted Materials:316 SS, 316L SS, Epoxy; Cable: Polyurethane or ETFE; Bullet Nose: PVC.Accuracy:±0.25% FS.Temperature Limit:SBLT2: 0 to 150°F (-18 to 66°C); SBLTX: 0 to 176°F (-18 to 80°C).Compensated Temperature Range: SBLT2: 0 to 140°F (-18 to 60°C); SBLTX: 0 to 176°F (-18 to 80°C).Thermal Effect:±0.02% full scale/°F.Pressure Limit:2X FS.Power Requirement:SBLT2: 13 to 30 VDC; SBLTX: 10 to 28 VDC.Output Signal4 to 20 mA DC, 2-wire. Response Time::50 ms.Max. Loop Resistance:900 Ω at 30 VDC.Electrical Connections: Wire pigtail.Mounting Orientation: Suspended in tank below level being measured.Electrical Protection:SBLT2: Lightning and surge protection; SBLTX: None.Weight:2.2 lb (1.0 kg).Agency Approvals:SBLT2: CE; SBLTX: CE, cULus intrinsically safe for Class I, Div. 1, Groups A, B, C, D; Class II, Div. 1, Groups E, F, G; Class III Div. 1. (According to control drawing . *Only up to 196 ft (59.5 m) for ETFE cable and 333 ft (101.5 m) for polyurethane cable.
Other supplier products
|
|
|
Welcome to purchase discount source electromechanical actuator from our company, which is one of the best China electromechanical actuator manufact... |
|
|
|
Welcome to purchase discount source orifice flow meter from our company, which is one of the best China orifice flow meter manufacturers and suppli... |
|
|
|
Welcome to purchase discount source desuperheater from our company, which is one of the best China desuperheater manufacturers and suppliers.Desupe... |
|
|
|
Welcome to purchase discount source precisor® ii and electro-pneumatic positioner from our company, which is one of the best China precisor® ii and... |
|
|
|
Welcome to purchase discount source dywer series crf2 capacitive level transmitter from our company, which is one of the best China dywer series cr... |
供应产品
Same products
