Spindle Pole Induction Hardening Machine Tool
Spindle pole induction hardening machine toolSpindle pole is an important part of textile machinery special parts on the spindle. The horizontal quenching machine tool Zhengzhou Gou’s produces is suitable for elongated parts with the diameter of 8-30mm and length of 50-400mm. There are two power supply frequency, quenching with 400KHz.Quenching machine tool is composed of the storage silos, feeding mechanism and a pair of co-rotating sticks. Quenching and tempering sensor is placed between two sticks with two fixed speed of 20mm / s and 200mm / s, three stepless adjusted speeds and two limited time devices.You can control the feed rate of the work piece and residence time’s length by setting. Quenching and tempering is carried out simultaneously. The whole process is controlled by the programming and non-contact switch, and quenching and tempering is completed continuously and automatically in one operation.
Other supplier products
|
|
|
Induction Heat Treatment for Spring WireSpring which is kind of mechanical part works through elasticity and is ordinarily made by spring steel. Sp... |
|
|
Portable Handheld Induction Welding Machine |
Parameters of Portable Handheld Induction Welding Machine: Product Model: TGS-100 Working Power: Three phase380V/50-60Hz Working Voltage: 342V-430V... |
|
|
|
Multi-layer Multi-turn Induction Heating Coil Multi-layer multi-turn sensor is a multi-multi-turn sensors to scan the track pin with quenching. It ... |
|
|
|
GS-ZP-400 Induction Annealing MachineContents:It is easy to adjust the output power, fast response, accurate control and heating conditions. And it... |
|
|
|
Double Frequency Gear Induction Hardening Production LineWork pieces are all rotated while medium frequency machine preheats and high frequency mac... |
供应产品
Same products
