PVDF Molding Grade
PVDF Molding Grade FTH-213 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)1～10ASTM D1238, 2300C/12.5kgAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.77～1.79ASTM D792, @23/230CWater absorption (%)≤0.05ASTM D570Mechanical properties Tensile yield strength(Mpa)≥40ASTM D638 50mm/min@230CYield elongation (%)5-20Tensile strength(Mpa)≥35Elongation at break (%)≥30Hardness(Shore D)70-80Thermal properties Melting point(0C)165~175ASTM D3418,100C/minProcess safety instructions λ This product should be processed under 370℃,to avoid producing toxic gases；λ PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；λ Operators should take good care of personal protection during the use procedure and processing.Packaging and storage λ PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.λ It must be stored in clean, cool, dry place.
Other supplier products
|
|
|
FEP Dispersion can be applied to process glass fibers fabric by dipping and roasting, corrosive and adhesive resistance coatings by spraying and co... |
|
|
|
Precompound FKMPrecompound FKM is the copolymer ofHexafluoropropylene (HFP) and Vinylidene Fluoride, with curing system. It hasgood processing and ... |
|
|
|
R152aR152a is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself, easily solube in oil b... |
|
|
|
R404AR404A is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R125, R134a an... |
|
|
|
PTFE Free Flow (Pelletized) ResinMain Technical PropertiesFT-4A2FT-4A3AppearanceWhite powder, no impuritiesTensile strength, Mpa ≥22.522.5Elongatio... |
供应产品
Same products
|
|
Spindle Test Arbor |
卖方: Shandong Jinjie Machinery Co.,Ltd |
Used for detecting the concentricity of the spindle.
Wooden box packing, store vertically to p... |
|
|
Shrink Fit ER Collet |
卖方: Shandong Jinjie Machinery Co.,Ltd |
Shrink fit collets adapter is used for collet chuck, driven tool holders, and direct clamping in ... |
|
|
STANDARD SHRINK FIT CHUCK 4.5° |
卖方: Shandong Jinjie Machinery Co.,Ltd |
WHAT ARE BENEFITS OF USING SHRINK FIT CHUCK 4.5°?
The use of a Shrink Fit Chuck4.5° offe... |
|
|
SLIM SHRINK FIT CHUCK, 3° |
卖方: Shandong Jinjie Machinery Co.,Ltd |
WHAT ARE BENEFITS OF USING SHRINK CHUCK, 3°?
Using a Shrink Chuck, 3° offers several ben... |
|
|
Grey Chip Board |
卖方: ValueApex (Shanghai) Information Technology Co., Ltd. |
Grey Board/Grey Chip Board
Product
Grey Board
Material
Mixed Pulp
... |
