FEP Extrusion Grade
FEP Extrusion GradeFEP is the copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP). It has excellent thermo-stability, outstanding chemical inertness, low friction coefficient, distinctive air aging resistance, vapor penetrating resistance, non-inflammability and superior electrical insulation.FEP extrusion grade is mainly used in extruding insulation layers and jackets for conducting wire and cable. It’s also widely used in the production of pipe, tube, film and etc.Package, storage and transportationFEP resin is sealed in plastic bag with 25kg net weight per bag, and then packed in drum or big cardboard box. It should be stored in clean and dry warehouses to avoid pollution from impurities. The processing temperature should be below 400 ℃ to avoid releasing toxic gases.
Items FEP Extrusion Grade FT-1FT-2FT-3FT-401FT-402FT-501FT-502AppearanceClean semitransparent pelletMelt flow rate（g/10min）2.1-4.04.1-8.08.1-12.012.1-16.016.1-20.020.1-24.024.1-27.0Tensile strength（MPa）≥Elongation at Break（%）≥Melting point（℃）265±10265±10265±10265±10265±10265±10265±10S.S.G2.12-2.17Volatile（%）≤0.10Thermo-stress craze resistanceVery goodVery goodgoodgoodgood goodgoodBreaking down Voltage（KV/mm）3.0×10-44.0×10-4ApplicationThick wire jacket, valve etc.Wire and cable for general purpose, pipe, tube etc.High Speed Extrusion. Thin wire and cable, tube etc.
Other supplier products
|
|
|
PTFE Free Flow (Pelletized) ResinMain Technical PropertiesFT-4A2FT-4A3AppearanceWhite powder, no impuritiesTensile strength, Mpa ≥22.522.5Elongatio... |
|
|
|
R507R507 is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R143 and R125. I... |
|
|
|
PVDF Li-battery Grade FTH-223CharacteristicPropertiesSpecificationASTM Test standardAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.74... |
|
|
|
PTFE Micro PowderPTFE micro powder is the micron-sized PTFE white powder which has low molecular weight range 10000~30000. It can be used as an add... |
|
|
|
FEP Molding (Lining) GradeFEP Molding grade FT-M has excellent thermo-stability and chemical inertness, outstanding electrical insulation and very ... |
供应产品
Same products
