0.22/0.45 Micron Gas Sterilization PTFE Membrane Filter
PTFE Membrane Specifications: Pore size: 0.1, 0.22, 0.45, 1.0, 3.0, 5.0μm Size: Φ300 Φ300-Φ293-Φ250-Φ200-Φ150-Φ142-Φ90-Φ60-Φ50-Φ47-Φ25-Φ13mm Roll: width 280mm, 310mm, length can be optionalFeatures: Good mechanical properties High porosity and high flow rate High temperature resistance, chemical resistance Consistency is goodHydrophobic PTFE MembraneType of MembraneHydrophobic PTFE MembranePore Size0.1μm0.22μm0.45μm1.0μmFluid flow rate
m3/m2/h≧1.2≧2.5≧4≧7Gas flow rate
m3/m2/h≧350≧600≧800≧1200Bubble Point≧0.15Mpa≧0.12Mpa≧0.07Mpa≧0.04MpaThe bubble point are tested with 60% isopropanol. The liquid flux are tested with isopropanol flow through the ø33 membrane at 760 mm Hg negative pressure at 25° CSterilizationAutoclave at 121° C for 30 minApplication Gas filtration, strong corrosion, strong oxidation, organic solvents, strong acid, strong base liquid filtration Pharmaceutical industry: for water injection, infusion and antibiotic industry air sterilization filter. Electronics industry: for semiconductor devices and integrated circuit workshop gas purification and organic solvent filtration. Chemical industry: for daily cosmetics containing ethanol and oil-like solution of the particulate filter. Public Health: Workplace dust particle filtration inspection. Food industry: beverage juice, alcohol, oil and other process gas filtration sterilization. Laboratory analysis: can also be used for aseptic inspection - filter membrane filtration and other scientific research in the determination and so on. Component processing: processed into PTFE folding cartridge filter, MBR membrane components
Other supplier products
|
|
|
Tanvi bag filter cartridges are high flow capacity, high efficiency, inside to outside flow, liquid filtration pleated bag replacement cartridges, ... |
|
|
|
Melt-blown filter cartridges are made of polypropylene with the manufactural process: melting, spinning, drawing, receiving. Manufactural process l... |
|
|
|
Specifications: Pore Size: 2.0, 0.3, 0.45, 0.05, 0.8, 1.2, 3.0, 5.0, 8.0 μm Diameter: Φ400, Φ300, Φ293, Φ250, Φ200, Φ150, Φ142, Φ90, Φ60, Φ50, Φ47,... |
|
|
|
Small PA Cartridge Filter System |
|
|
|
Polypropylene filter housings are available for applications where materials such as stainless steel are incompatible with the fluid to be processe... |
供应产品
Same products
