Industrial Microwave Isolator
Dolph Microwave offers the standard product of Industrial Microwave Isolator for 915 and 2450MHz. Using standard waveguide flange, the product covers a wide frequency band and complete categories. Taking the WR340 (2450MHz) for example.
FAQs of Industrial waveguide isolator
Application of Industrial Microwave Isolator
Industrial Microwave Isolator is a 2-port device that passes signals in one direction and blocks signals in the other direction. It is used to shield equipment on its input side from conditions on its output side. For example, it prevents detuning of microwave sources due to load mismatch.
Work Principle of Industrial Microwave Isolator
The Industrial Microwave Isolator is a non-reciprocal device with an asymmetric scattering matrix. An ideal Industrial Microwave Isolator transfers all power going into port 1 to port 2 while absorbing all the power going into port 2. To achieve non-reciprocity, the isolator must contain non-reciprocal materials. At microwave frequencies, this material is usually a ferrite biased by a static magnetic field, but can also be a self-biased material. The ferrite is located within the isolator so that the microwave signal presents a rotating magnetic field to it, with the axis of rotation aligned with the direction of the static bias field. The behavior of ferrites depends on the direction of rotation relative to the bias field and is therefore different for microwave signals propagating in the opposite direction. Depending on the specific operating conditions, signals propagating in one direction may be phase shifted, removed from the ferrite, or absorbed.
If you are looking for a reliable waveguide company, don't hesitate to contact us!
在线联系供应商
Other supplier products
 |
Double Ridged Waveguide Tube | Application of Rectangular Waveguideand Applications of Circular Waveguide Dolph Microwave Double-ridge waveguide tubingare rectangular waveguid... |
 |
Double Ridged Waveguide Tees | Dolph Microwave provides a series of high-performance waveguide tees, power divider, and combiner products. By connecting a load to the E and H pla... |
 |
Double Ridged Waveguide Couplers | microwave coupler, typical main line standing wave VSWR1.10, auxiliary line standing wave VSWR1.25 within 20% of the waveguide bandwidth, typical c... |
 |
INDUSTRIAL MICROWAVE COMPONENTS | Dolph Microwaveoffers a full line of industrial microwave products. Specializing in waveguide components, including launchers, isolators, direction... |
 |
Industrial Microwave Coupler | Dolph Microwave manufactures Industrial Microwave Coupler covering a wide frequency range. Microwave components for industry microwave is 915 and 2... |
Same products
 |
Ku Band Drone Detection Radar System | 卖方: Corech Microwave | 3D Solid State, Full Phase Reference, Active 2D phased array Corech Microwave LimitedWeb... |
 |
Ku Band Drone Detection Radar System | 卖方: Corech Microwave | Corech Microwave Limited Website : E-mail: Tel : +86 28 8705 7896 |
 |
CSG9K40GA Signal Generator | 卖方: Corech Microwave | CSG9K40GA Signal Generator Freq. Range: 9kHz-40GHz Freq. Resolution: 0.001Hz Operating Mode: CW /... |
 |
BLIIoT ARM Embedded Computer ARMxy Series BL410 Series with High Performance Cortex-A55 with 1Tops NPU | 卖方: 深圳市钡铼技术有限公司 | The BL410 series is an industrial-grade ARM embedded computer from the ARMxy series, featuring hi... |
 |
RK3568 4xA55 1.8GHz 4+32G 1Tops NPU Industrial Embedded Controller with 2Ethernet 4RS485/RS232 4DIN+4DO | 卖方: 深圳市钡铼技术有限公司 | The BL410 series is an industrial-grade ARM embedded computer from the ARMxy series, featuring hi... |
