Rubber Gaskets
Rubber Gaskets
Specification:
|
Item |
Specification |
|
Operating condition |
PN: 1.0/1.6/2.5 Mpa |
|
The water temperature |
up to 120℃ |
|
Material |
EPDM/NBR/NR/SILICONE,Viton |
|
Size |
DN20-DN2000 |
|
Standard |
BS, DIN, ANSI, JIS or others provided drawing samples |
|
Media |
Hot Air, SO2, Steam, Water, Oil, Acid, Gas And etc. |
|
hardness |
20 ~ 90 shore A |
|
craft |
Compression, injection, extrusion |
Application:
Electronic field, industrial machine & equipment, house-hold appliance, tele-communication, automobile, medical equipment industry etc, flange gaskets, T type rubber rings, use for sealing.
Features:
|
NBR |
excellent resistant to oil, widely used in industrial area |
|
EPDM |
excellent resistance to weather and ozone, good resistance to heat,low temperature and chemical |
|
NR |
high elasticity,good chemical strength |
|
CR |
generally good resistance to ozone, aging,and chemical,good mechanical properties over a wide temperature range |
|
SBR |
shock resistance,performance well in adhesion and sealing |
|
Silicone |
widest operating temperature range, performance stably in high and low temperature,widely use in food sealing area |
|
VT/FKM |
excellent resistance to high temperature and a broad range of chemical,permeability and compression set are excellent |
|
HNBR |
thermal stability and oxidation resistance |
|
IIR |
low permeability rate and good electrical properties |
|
FVMQ |
widest operating temperature range,performance stably in high and low temperature, good resistance to oil and fuel |
|
ACM |
good resistance to mineral to oil, oxygen and ozone |
Packing: Carton + pallet.
在线联系供应商
Other supplier products
 |
Double Orifice Air Valve | Double Orifice Air Valve Cast Iron Valve Flange drilled to EN1092-2 Standard:EN1074-4, BS, ANSI. Working pressure:10bar/16bar/25bar. Testing pressu... |
 |
Steel Pipe Fittings China | Ductile Iron Pipe(Self-anchored or Restrained Joint) Ductile Iron Pipe DI PVC Fittings Product Name: Ductile Iron Pipe(Self-anchored or Restrai... |
 |
AWWA Fittings | AWWA Fittings Ductile Iron Pipe Fitting Standard:AWWA C110 (flange fittings), AWWA C153(MJ fittings). Working pressure:MJ fittings: 350 PSI rating ... |
 |
DI Flange Fittings | DI Flange Fittings Flanged Fittings Ductile Iron Pipe Fitting Standard:ISO2531，EN545，EN598 Pressure:PN10/PN16/PN25/PN40 Body material:Ductile iron ... |
 |
Under Ground Fire Hydrant | Under Ground Fire Hydrant Standard: BS750 Material: Ductile iron GGG50/40 or cast iron, Bonnet: Cast iron/ Ductile iron Coating: Internal and ex... |
Same products
 |
Limestone | 卖方: Guangdong Dacheng Ceramics Co., Ltd. | Limestone Limestonedesign is inspired by Limestone, the “stone with the most story” ... |
 |
Welded Stainless Steel Roofing System | 卖方: Guangzhou B&G Building Technology Co.,Ltd | Welded Stainless Steel Roofing System Stainless steel fully welded roofing systemis a high-end r... |
 |
Flat Roofing System | 卖方: Guangzhou B&G Building Technology Co.,Ltd | Flat Roofing System The surface of the roof panel of the high level straight metal roofing syste... |
 |
Double Lock Standing Seam Roofing System | 卖方: Guangzhou B&G Building Technology Co.,Ltd | Double Lock Standing Seam Roofing System Tech-seam special seal is a 360° double-crimped ful... |
 |
Super Wind Uplift Resistant Roofing System | 卖方: Guangzhou B&G Building Technology Co.,Ltd | Super Wind Uplift Resistant Roofing System The Tech-zip II Wind Resistant Upright Hem Metal Roof... |
