Medium Frequency Induction Heating Machine
JKZ,induction heating power supply,can provide you a complete induction heating equipment experience service. Our service staff will give customers a full response immediately,We can provide induction heating machine, industrial induction heating system, induction heating device, induction heating equipmentand so on,and meet the customer's various needs for equipment.
If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep heat treatment, the MFS series of intermediate frequency induction heating equipment is your most correct choice.The preheating metal before weldingneeds pre heat treatment in welding, which include preheating before welding, preheating in welding. In which we need care about preheat temperature for weldingand methods of preheating in welding.
Medium Frequency Induction Heating Machine Types
MFS-120A
1-8KHZ 120KW 182A
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine
MFS-160A
1-8KHZ 160KW 250A
MFS-200A 1-8KHZ 200KW 310A Medium Frequency Induction Heating Machine
MFS-200A
1-8KHZ 200KW 310A
MFS-250A 1-8KHZ 250KW 380A Medium Frequency Induction Heating Machine
MFS-250A
1-8KHZ 250KW 380A
MFS-300A 1-8KHZ 300KW 460A Medium Frequency Induction Heating Machine
MFS-300A
1-8KHZ 300KW 460A
MFS-350A 1-8KHZ 350KW 530A Medium Frequency Induction Heating Machine
MFS-350A
1-8KHZ 350KW 530A
MFS-400A 1-8KHZ 400KW 610A Medium Frequency Induction Heating Machine
MFS-400A
1-8KHZ 400KW 610A
MFS-500A 1-8KHZ 500KW 760A Medium Frequency Induction Heating Machine
MFS-500A
1-8KHZ 500KW 760A
MFS-600A 1-8KHZ 600KW 910A Medium Frequency Induction Heating Machine
MFS-600A
1-8KHZ 600KW 910A
Advantages of Medium Frequency Induction Heating Machine
The induction heating speed is fast and the temperature uniform is good. The MFS series induction heating power supply can design the operating frequency according to the actual needs of customers. The workpiece is non-contact heating. The metal workpiece heats itself through the alternating eddy current, which has high efficiency and a good temperature uniform effect.
The induction heating energy efficiency is high. As a mature medium frequency induction heating series, the MFS series adopts IGBT and adjusts the power by adjusting the wave, and uses high-quality copper material as the main circuit base layer, which can effectively reduce the loss of the components and the circuit itself.
The design of this medium frequency induction heating machine can also allow customers to directly set the working status (power, working mode, etc.) of the heating equipment through the touch screen. At the same time, customers can also accept external PLC control through RS485 or reserved external signal I/O modules.
Standard MFS can be applied to wide voltage fluctuation (*360V~440V), and non-standard voltage power supply can also be customized according to the actual situation of customers.
This medium frequency induction furnace is also equipped with a condition monitoring system(CMS) and a built-in condition detection system just like any other induction heating system launched by JKZ. Through the single-chip microcomputer, this medium frequencty induction heating series can effectively monitor the temperature, current, voltage, water flow, etc. of the main components of the equipment. Problems like overvoltage, undervoltage, overtemperature, water shortage, phase failure, and overcurrent can be easily detected.
With different output modules, MFS series induction heating power supplies can complete induction forging, induction quenching, and non-ferrous metal induction smelting.
在线联系供应商
Other supplier products
 |
SWP-MT 15KHz-30KHz Medium Frequency Induction Heating Machine | SWP 300series are JKZ's newly designed and manufactured induction heating power supply. The MT version of SWP series equipment uses IGBT as the ... |
 |
SWS-25A 15-30KHZ 25KW 36A Ultrasonic Frequency Induction Heating Machine | To realize the better performance of SWS-25A, JKZ has designed a fully digital control induction heating generator at the frequency range of 15~30K... |
 |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency induction heating machine, mfs machinehas an outpu... |
 |
Ultrasonic Frequency Induction Heating Machine | SWS series ultrasonic heating machinehas a very wide application field. It can be used in automobile and motorcycle parts production, metal hot for... |
 |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency induction heating machine, MFS-120A has an output ... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
