.

FLOODED LEAD ACID BATTERY

Types of Flooded Lead Acid Batteries

There are many types of flooded lead-acid batteries, which are used in photovoltaic energy storage systems. There are three types that are mostly used: flooded lead-acid batteries, valve-regulated lead-acid sealed batteries, and lead-carbon batteries.

Flooded type Lead-acid Battery

The sulfuric acid in the electrolyte of flooded type lead acid batterydirectly participates in the battery charging and discharging reaction process. In traditional lead-acid batteries, the remaining space in the battery jar, except for the polar plates, separators and other solid assembly parts is completely filled with sulfuric acid electrolyte, which is deep cycle flooded wet lead acid battery, in which the electrolyte is in a state of excess, so it is called a "flooded" battery with the battery polar plates completely immersed in the sulfuric acid electrolyte. There is a cover on the top of the flooded type lead acid battery that can ventilate and prevent the liquid from splashing. During use, due to the evaporation and decomposition loss of water, the cover needs to be opened regularly to add distilled water and adjust the electrolyte density, so it is customarily called "open type" battery. The flooded type lead acid battery has the characteristics of high power conversion efficiency, long cycle life, high terminal voltage, strong safety, high cost performance, simple installation and maintenance, etc. It is currently the preferred chemical power supply in various energy storage, emergency system battery, and start-up devices.

Valve-regulated Lead-acid Sealed Batteries(VRLA batteries)

They are also known as maintenance-free batteries, which can be divided into two types: AGM lead-acid batteries and gel-sealed lead-acid batteries. The AGM battery uses pure sulfuric acid aqueous solution as the electrolyte, most of which is in the glass fiber membrane, and a part of the electrolyte is absorbed inside the polar plate. AGM sealed lead batteries have less electrolyte, thicker polar plates, and lower active material utilization than open-ended batteries, so the discharge capacity of the battery is about 10% lower than that of open-ended batteries. Compared with today's gel-sealed batteries, AGM sealed lead batteries have a smaller discharge capacity. Gel-sealed lead storage battery (ie GEL type battery) and gel lead-acid battery are improvements of the ordinary lead-acid battery with liquid electrolyte. It replaces the sulfuric acid electrolyte with the gel electrolyte, which improves the safety, storage capacity, discharge performance and service life when compared with ordinary batteries. Its electrolyte is made of silica sol and sulfuric acid. The concentration of the sulfuric acid solution is lower than that of absorbent glass mat battery, and the amount of electrolyte is more than that of absorbent glass mat battery, which is equivalent to flooded batteries. This electrolyte exists in a gel state and is filled in the separator and between the positive and negative electrodes. The sulfuric acid electrolyte is surrounded by gel and will not flow out of the battery.

Lead-carbon Batteries

It is a capacitive lead-acid battery, which is a technology evolved from the traditional lead-acid battery. It adds activated carbon to the negative electrode of the lead-acid battery, which is a flooded lead acid battery for solar power, and it can significantly improve the lifetime of lead-acid batteries. Lead-carbon batteries are the most advanced technology in the field of flooded lead-acid batteries, and they are also the development focus of the international energy storage industry for new energy, and have very broad application prospects.They are widely used in energy storage fields such as photovoltaic power station energy storage, wind power energy storage and grid peak shaving.

Different Voltages of The Flooded Lead-acid Batteries

When the flooded lead-acid battery is discharged, the metal lead is the negative electrode, which occurs the oxidation reaction and produces lead sulfate; the lead dioxide is the positive electrode, and the reduction reaction occurs to produce lead sulfate. When the battery is charged with direct current, elemental lead and lead dioxide are generated at the two poles respectively. After removing the power source, it returns to the state before discharge to form a chemical battery. Lead batteries can be charged and discharged repeatedly, whose single voltage is 2V. The battery is a battery pack composed of one or more cells, referred to as storage battery. The most common ones are 6v flooded lead acid batteries, 8v flooded lead acid batteries, and 12v flooded lead-acid battery, and there are other 2 volt flooded lead acid battery, 4V, 24V batteries.

The charging and discharging current of the battery are related to the system. If it is not designed well, it will affect the performance of the system. Shallow cycle discharge helps to extend flooded lead acid battery life. The shallow cycle operation of the battery has two obvious advantages: first, the battery generally has a longer cycle life; second, the battery often retains more spare ampere-hour capacity, so that the power supply guarantee rate of the photovoltaic system is higher. According to actual operating experience, the moderate depth of discharge is 60% to 70%.

KIJO is a leading flooded lead acid battery supplier/manufacturer/company in China, please contact us!

KIJO battery Group is one of the mostprofessionalstorage battery suppliersand vrla battery suppliers, we provide motive battery, ups power supply battery, front terminal battery and etc. Want to know more about industrial lead acid battery marker? Please contact us.



在线联系供应商

至: Jiangxi JingJiu Power Science& Technology Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

25.2V Lithium ion Battery
25.2V Lithium ion Battery Founded in 1993, KIJO batteryGroup is a professional storage battery manufacturerintegrating science, industry and trade. KIJO has a production cap...
GEL DEEP CYCLE BATTERY
GEL DEEP CYCLE BATTERY Deep circulation gel cell is very common in various fields, and it mainly has the three types. Types of Deep Cycle Gel Batteries battery ge...
FLOODED LEAD ACID BATTERY
FLOODED LEAD ACID BATTERY Types of Flooded Lead Acid Batteries There are many types of flooded lead-acid batteries, which are used in photovoltaic energy storage systems....
BACKUP BATTERY SUPPLY SYSTEM
BACKUP BATTERY SUPPLY SYSTEM Thelithium backup power supplyis also called an emergency power supply. It is a device that replaces the main power supply to supply power to the l...
Small Silver Fish Water Bottle 24V Lithium Battery
Small Silver Fish Water Bottle 24V Lithium Battery KIJO Group is a professional storage battery manufacturerin China, which is committed to offering better battery solution to clients all over the w...
供应产品

Same products

CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS 卖方: ZK Electronic Technology Co., Limited Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF 卖方: ZK Electronic Technology Co., Limited Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer 卖方: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...