C2-24 Bidirectional Latent Lifting AGV
C2-24 Bidirectional Latent Lifting AGV first moves to the bottom of the material trolley, then lifts the material trolley and moves to the destination. The AGV lifting mechanism has a load capacity of up to 2000KG, and has the functions of identifying material trolley and synchronous rotation.
Core Advantages of C2-24 Bidirectional Latent Lift AGV China
01
Strong carrying capacity
The carrying capacity can reach 2000KG, and the full-load moving speed can reach 60m/min.
02
Strong adaptability to the environment
The map is self-learning, and the operation map is automatically updated according to the on-site environment when working, which greatly improves the environmental adaptability.
03
Lifting control
The lift AGVautocan interact with the elevator to complete the operation of automatically going up and down floors.
04
High positioning accuracy
The primary positioning accuracy can reach ±10mm, and the secondary positioning accuracy can reach ±5mm
05
High work efficiency
Equipped with a full servo drive, it can increase the speed quickly (0-72 meters per minute only takes 3 seconds), and has a fast rotation function (only 3 seconds for in-situ rotation)
06
Multi-AGV linkage
Synchronous linkage of multiple AGVs is suitable for complex material handling scenarios.
07
Automation and labor saving
No manual intervention is required in the production process, and the scheduling system is fully automatic.
08
Fault self-check
With fault self-checking function, remote fault diagnosis and self-recovery function.
09
Automatic battery charging
When the AGV detects a low battery state, it will automatically move to the charging station for charging. The online time can reach 24 hours a day to improve productivity.
10
Multiple security protection
Equipped with laser obstacle detection sensor, mechanical anti-collision device and sound and light warning to ensure safe operation.
If you want to know more types of outdoor autonomous mobile robots, please contact us.
在线联系供应商
Other supplier products
 |
C3-14 Single conveyor deck load AGV | C3-14 single conveyor deck load AGV is a standard single-station single-station roller AGV, which uses the bearing roller platform to automatically... |
 |
C3-31 Three Conveyor Deck Load AGV | C3-31 three conveyor deck unit load carrier AGV is a single-layer three-station roller AGV. The roller platform and the production line or transmis... |
 |
C4-C1 Rear Traction AGV | C4-C1 traction AGV is a laser guide navigation traction tugger AGV, using the tail traction device to pull materials, the traction capacity can rea... |
 |
C1 Latent Traction AGV Guided Vehicle | The latent traction series automated guided vehicle for sale can lurch under the feeder, use the towing bar to automatically lift, hook or drop off... |
 |
CCM-11 Customization AGV | CCM-11 Customization AGV CCM-11 customized agv laseris customized for SMT production line, supporting customized navigation mode according to dema... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
