.

Zinc Metal Oxide Varistor Disc for Surge Arresters

ZnO resistor is the core element of the lightning arrester. It mainly protects power system equipment by limiting lightning overvoltage to ensure that the line does not trip. The performance indicators of ZnO resistors mainly include potential gradient, flow capacity and nonlinear coefficient, which are determined by the formula and process on the macro level and by the "ZnO grain-boundary layer" characteristics on the micro level.

ZnO grain: it is the main body of the resistance sheet, there is a small amount of cobalt (Co), manganese (Mn) and other elements in the solid solution accounting for more than 90% of the volume, and the size is 5-15 μ m. The resistivity is 0.001-0. l Ω. m and there is a small amount of cobalt (Co), manganese (Mn) and other elements in the solid solution.

Grain boundary layer: it is the enrichment area of dopants. The resistivity under a low electric field is greater than l00M Ω. m, and it is in the conduction state under a high electric field. The grain boundary layer is the source of pressure-sensitive characteristics.

Features of zinc oxide discfor Surge Arrester

Small current area: the resistance sheet presents a high resistance value, and the current flowing is below 1mA. The ratio of the inflexion point voltage to the thickness of the resistance sheet in this area is a potential gradient.

Non-linear area: It is the working area of the resistor. The flatter the U-I curve, the higher the non-linear coefficient of the resistor; The wider the range, the better the flow capacity.

High current area: the resistance sheet may be damaged when it enters the low resistance state.



在线联系供应商

至: Guangdong Yufeng Industries Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

MOV Blocks
MOV Blocks MOV blocksare essential components for maintaining the integrity and reliability of electronic and electrical systems, as they can prevent costly d...
MOA Metal Oxide Varistor Surge Arresters
MOA Metal Oxide Varistor Surge Arresters A metal oxide varistor surge arrester(MOA) is an electrical device that is designed to protect electrical systems and equipment from surges caused ...
66kV Surge Arrester
66kV Surge Arrester When the communication cable or equipment is operating under normal operating voltage, the 66kV surge arresterwill not have an effect, and it is re...
Lightning Arrestor Resistors
Lightning Arrestor Resistors The lightning thunder resistor for homeis the core part of the lightning arrester. It uses zinc oxide as the main component, adding a small amount ...
Arrester Silicone Rubber
Arrester Silicone Rubber Arrestor Silicone Rubber is a type of silicone rubber designed to protect electrical systems from surges and lightning strikes. YF POWER, a leading...
供应产品

Same products

CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS 卖方: ZK Electronic Technology Co., Limited Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF 卖方: ZK Electronic Technology Co., Limited Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer 卖方: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...