EHS Shore Durometer Hardness Tester Unit
EHS1A/5D is a high-precision digital shore hardness meter. This EHS digital shore durometer gauge adopts high-precision displacement sensor and spring design with high test accuracy.
Shore durometer tester or durometer meterhas three measurement modes: maximum mode, maximum average mode, and timing mode; 500 measurement data can be stored as one type of hardness test instrument, and the measurement data can be connected to PC software to export, built-in wireless printing function, you can connect wireless printer to print measurement data.
The rubber roller hardness tester/durometer gauge price from our measuring instruments manufacturing company is very reasonable, welcome to order our durometer rubber rollershore hardness tester unit.The shore A durometer gaugeused to measure soft plastic, rubber, synthetic rubber, felt, and leather. The shore A hardness test method is either hand-held for measurement or used in conjunction with the supporting load frame, and durometer hardness unit is the "degree". Different from the leeb portable hardness tester which is mainly used to test the hardness of metal materials, the shore A durometer gauge is focused on rubber and soft plastic hardness test.
Shore Hardness Gauge-1600 Features
Shore A Durometer Gauge include a Calibration certificate
Shore A Meter conforms to ASTM D 2240, GB/T 531.1, ISO7619-1
Shore Hardness Gauge has a large, easy-to-read LCD display with a backlight
Shore Durometer tester measurement modes are concluding Averaging mode, Max mode, Max-Average mode
Shore Hardness Meter measurement data can be stored, browsed, and batch printing
Printing: Wireless mini printer
Shore Hardness Meter-1600 Specifications
Shore A durometer tester is usually classified into the following types. Digital durometer shore A is used for measurements below 90 degrees, and shore D hardness durometer tester is used for measurements above HA 90 degrees. Shore O hardness shore o shore o durometerfor rubber is used when the measuring degree is less than 20 degrees and the thickness of the measuring object is less than 3mm (the two are actually used less).
How To Use Durometer Gauge?
1． Specimen
（1）The surfaces of the specimen shall be flat and parallel over an area to permit the presser foot to contact the specimen over an area having a radius of at least 6.0 mm from the indenter point.
（2）The specimen shall be suitably supported to provide for positioning and stability.
（3）The specimen shall be at least 6.0 mm in thickness unless it is known that results equivalent to the 6.0mm values are obtained with a thinner specimen.
（4）The lateral dimensions of the specimen shall be sufficient to permit measurements at least 12.0 mm from any edge.
2． Test Mode
There are three kinds of modes:
Average mode(AVE), maximum mode (MAX) , and Timing mode.
AVE: To calculate the hardness value with the average indentation depth.
MAX: To calculate the hardness value with the maximum indentation depth.
Timing: To calculate the hardness value with the maximum indentation depth.
3． Test Procedure
4． Reading Test Data
The measured value, mean and maximum value can be read on LCD.
And can browse the historical data in memory. The data in memory are the average of every statistic group.
Enter Menu-Memory, select Browse All, or Browse Select.
5．Data Printing
The test report can be print using EPX-58P wireless printer. You can set the Auto Print to ON, or print the historical data in memory by Print All and Print Select. The print items can be chosen in Print Items.
Turn on the printer, and put it near the durometer (not more than 2m away). If Auto Print is set to ON When a group of tests is finished the report will print automatically.
How To Calibrate Shore Hardness Tester？
For a long-term use or other reasons, some measurement errors may occur. The error can be eliminated by the calibration of shore hardness tester unit.
Enter Menu-System-Calibration
Test on a standard hardness block or a standard thickness block.
As a professional measuring instruments suppliers, Mikrometryprovide force gauge meter, cap torque meter, shore instruments durometer, shore meter hardness, durometer gauge for rubber, digital torque gaugeetc. We also offer optimized solutions for special requirements.
在线联系供应商
Other supplier products
 |
Coating Metal Thickness Gauge | Mikrometry Coating Thickness Detector will measure all coatings on metallic substrates using the magnetic induction or eddy-current principles, ens... |
 |
ETTB Torque Meter | Mikrometry Instrument Limited is a measuring instruments manufacturing companyand manufacturer ofdigital height gauge, force and torque measurement... |
 |
EFGE Digital Push Pull Force Gauge | With compact size, high accuracy, digital push pull force meteris easy to operate and handy to carry out. The digital push pull force gauge, also c... |
 |
DHG-050N Precision Height Gauge | The DHG-050N precision height gauge is a compact digital micrometer offering flawless contact measurements of dimensions, thickness, and depth. Thi... |
 |
EFG Handheld Digital Compression Force Gauge | The compression force measurement toolis a small, simple, multi-function, and high precision push and pull test instrument, which is widely used in... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
