Electrostatic Dust Collector
The working principle of the electrostatic dust collectoris to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode.
The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dust collection electrode are not easily released. A voltage gradient between the dust layers can cause partial breakdown and discharge. These conditions will result in a drop in dust removal efficiency. The basic principle of electrostatic precipitators is to use electric power to trap dust from the fumes, which mainly includes the following four interrelated physical processes:
(1) The ionization of gas.
(2) The charge of dust.
(3) Charged dust moves to the electrode.
(4) Charged dust collection.
The most important motive of the company's products is to separate the particles and quality dust from the industrial exhaust gas, turning waste into treasure to be recycled. As the dust collection system manufacturer, main all types of dirt elimination equipment and accessories production: including long bag pulse dirt collector, gas box and stand-alone pulse dirt collector, electrostatic precipitator, electric powered auxiliary tar, etc. Warmly welcome forbusiness negotiations!
在线联系供应商
Other supplier products
 |
PPS Filter Felt Bag | PPS Filter Bagdescription: Material: Polyphenylene sulfide (PPS) Common industries and conditions: for coal-fired boilers, waste incineration, met... |
 |
DMF-Z Right Angle Electromagnetic Pulse Valve | DMF-Z Right Angle Electromagnetic Pulse Valve Product introduction: The electromagnetic pulse valveis imported from abroad (also known as the diap... |
 |
DDMC Single Pulse Jet Bag Filter Dust Collector | Single-pulse jet bag filter is widely used in mining, electric furnace smelting, machinery manufacturing, chemical products, cement, building mater... |
 |
ZC Type Mechanical Rotary Blow Flat Bag Filter | ZC Type Mechanical Rotary Blow Flat Bag Filter Introduction: The dust collector adopts a circular body structure with uniform force, good anti-knoc... |
 |
Baghouse Filter | Baghouse filter main parts 1 electromagnetic pulse valve 2 pulse controller 3 filter bag bag cage 4 dust filter bag 5 spray ash cleaning Baghouse... |
Same products
 |
焚烧处理 垃圾发电厂 | 卖方: 杭州火印科技有限公司 | 磁力富氧低温废物分解装置。Fire print垃圾焚烧炉不需要燃料。燃烧过程不需要电。我们从空气中分离富含氧气的气体，帮助焚烧炉连续分解垃圾。没有黑烟，空气中没有灰尘。少量的蒸汽从管道中排放出来... |
 |
学校强力消毒灭菌设备 | 卖方: 杭州火印科技有限公司 | 空间消毒设备 学校强力消毒灭菌设备 强大的杀菌、消毒、除臭设备， 提前踏入室内空间， 对感染区域进行消毒， FIRE PRINT 消毒、杀菌、除臭设备， 采用低温等离子技术， 高强度电场穿透空气... |
 |
车间强力消毒灭菌设备 | 卖方: 杭州火印科技有限公司 | 空间消毒设备 车间强力消毒灭菌设备 强大的杀菌、消毒、除臭设备， 提前踏入室内空间， 对感染区域进行消毒， FIRE PRINT 消毒、杀菌、除臭设备， 采用低温等离子技术， 高强度电场穿透空气... |
 |
车间强力消毒灭菌设备 | 卖方: 杭州火印科技有限公司 | 空间消毒设备 车间强力消毒灭菌设备 强大的杀菌、消毒、除臭设备， 提前踏入室内空间， 对感染区域进行消毒， FIRE PRINT 消毒、杀菌、除臭设备， 采用低温等离子技术， 高强度电场穿透空气... |
 |
医院走廊消毒灭菌设备 | 卖方: 杭州火印科技有限公司 | 空间消毒设备 强大的杀菌、消毒、除臭设备， 提前踏入室内空间， 对感染区域进行消毒， FIRE PRINT 消毒、杀菌、除臭设备， 采用低温等离子技术， 高强度电场穿透空气 产生大量的自由基和负... |
